| FIRMWARE VERSION
|
RELEASE DATE
|
CHANGES
|
|---|
| 01.09.22.Rev.00
|
2018.11.16
|
- GPS stability improvement
- DOUT control improvements
- SMS commands improvements
- Immobilizer scenario improvement
|
| 01.09.09.Rev.00
|
2018.05.30
|
- 4G (LTE and NB-IoT) network support added (for FM36M1)
- GNSS module control improvements
- Jamming detection improvements
- SMS commands improvements
- Power consumption efficiency improvements
- FOTA stability improvements
- Configuration stability improvements
|
| 01.08.16.Rev.00
|
2018.02.26
|
- GPS stability improvement
- iButton detection improved
|
| 01.08.12.Rev.00
|
2018.01.12
|
- Data sending improvements
- Geofence changes
- Deep sleep improvements
|
| 01.08.07.Rev.00
|
2017.11.22
|
- 2G/3G networks working algorithm improvements
- GNSS module control improvements
- LV-CAN200/ALL-CAN300 functionalities improved
- FOTA application improvements
- 1- wire devices detection improvements
- Deep sleep improvements
- UPD sending improved
- Static navigation improvements
- SMS functionality improved
|
| 01.06.06.Rev.00
|
2017.07.24
|
- FM3612 support added
- Added support for UDP GPRS commands
- Recods saving and managing improved
- Operators selection and managing improved
- Setdigout SMS command stability improved
- LV-CAN200/ALL-CAN300 functionalities improved
- GPRS connection stability improved
- GNSS module control improved
|
| 01.05.06.Rev.00
|
2017.01.03
|
- Battery charging reworked to detected car voltage system - 6, 12, 24 volts and not to drain battery to empty
- Fixed setdigout SMS
- Operator search optimization
- Battery will not be charged if external voltage is low
- SMS reading improvements
- TCP configuration improvement
- GNSS module improvements.
- Debug improvements
- Firmware update via FOTA application improvements
- Functions optimization
- NMEA reading optimization
- Battery charge algorithm improvements
- Movement detection improvements
|
| 01.05.00.Rev.00
|
2016.11.16
|
- Remember iButton functionality added
- ALLCAN 300 functionality Implemented
- CAN parameters handling improvements
- LV-CAN200/ALL-CAN300 parameters data handling improvements
- Default configuration parameter change: Stop detection source -> Msensor
|
| 01.03.02.Rev.00
|
2016.10.04
|
- Added H910-GL Modem support
- Added FM3602 HW support
- Record size optimization
|
| 01.02.01.Rev.00
|
2016.08.04
|
- Added GNSS state element (0-5)
- Added Quectel UC20 support
- Idling scenario and configurable ignition timeout functionality added for authorized driving/immobilizer scenarios
- Continuous odometer function added
- TTJ ID added
- Telit and Quectel hardware support added
- Added ignition detection timeout setting
- Igntion timeout configuration added
- iButton list configuration improvements.
- Deep sleep improvements
- Data sending optimization
- CSQ calculation improved
- SIM card initialization improved
- Configuration via FOTA improved
- Dallas temperature sensor data handling improvements
- Overspeeding scenario improvements
- Fixed double event record saving
- Signal level calculation optimization
- Cell ID IO element changed to 4 bytes
- Changed modem turn on, turn off to proper edition
- Offline/online log improvements.
|
| 01.00.02.Rev.00
|
2016.02.04
|
- Protection from incorrect power voltage configuration added
- Added battery unlock function
- Predefined number SMS functionality improvements.
|