Wiki Knowledge Base | Teltonika GPS

Template:FMU1 First start card

Revision as of 10:21, 27 July 2020 by Gediminas.suminas (talk | contribs)

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)
Qsg rut950 teltonika.PNG
FMU125 00.png

GNSS/GSM/Bluetooth tracker with internal GNSS/GSM antennas



How to insert Micro-SIM card and connect the battery

  1. Gently remove FMU1YX cover using plastic pry tool from both sides.
  2. Insert Micro-SIM card as shown with PIN request disabled or read Security info how to enter it later in Configurator. Make sure that Micro-SIM card cut-off corner is pointing forward to slot. SIM slot 1 is closer to PCB, SIM slot 2 is the upper one.
  3. Attach device cover back.
  4. Device is ready to be connected.

FMB1 cover1 correct.pngFMB1 cover2 correct.pngFMB1 cover3 correct.pngFMB1 cover4 correct.png

Alert.png
 Micro-SIM card insertion/removal must be performed when device is powered off – external voltage and internal battery disconnected. Otherwise Micro-SIM card might be damaged or device will not detect it.
Retrieved from "https://wiki.teltonika-gps.com/index.php?title=Template:FMU1_First_start_card&oldid=59296"