Template:FMB208 First start card
Revision as of 11:47, 15 December 2020 by Tomas.Gudonis (talk | contribs) (→How to insert {{{sim_type|Micro-}}}SIM card {{{battery|and connect the battery}}})
FMB208 Teltonika FMB208 is a SPECIAL waterproof tracker with Bluetooth connectivity and integrated backup battery. Device was designed to meet Indian government regulation AIS 140
How to insert Micro-SIM card and connect the battery
- Unscrew 6 screws counterclockwise that are located on the bottom of the FMB208 device.
- Remove the cover.
- Insert Micro-SIM card as shown with PIN request disabled or read Security info how to enter it later in Teltonika Configurator. Make sure that Micro-SIM card cut-off corner is pointing forward to slot.
- Connect battery as shown to device.
- After configuration, see “PC Connection (Windows)”, attach device cover back and screw in all screws.
Device is ready to be mounted.
 |
Micro-SIM card insertion/removal must be performed when device is powered off – external voltage and internal battery disconnected. Otherwise Micro-SIM card might be damaged or device will not detect it. |
Cable colors
| PIN NUMBER | PIN NAME | DESCRIPTION |  |
|---|---|---|---|
| Red | VCC (10-30)V DC (+) | Power supply (+10...30 V DC) | |
| Black | GND (-) | Ground | |
| Yellow | DIN 1 | Digital input, channel 1 | |
| White/Green | DIN 2 | Digital input, channel 2 | |
| White | DOUT 1 | Digital Output Channel 1 | |
| Grey | AIN 1/DIN 3 | Analog input, channel 1. Input range: 0-30 V DC/Digital input channel 3 | |
| White/Orange | RS232-TX | Output for data transmission through RS-232 | |
| Violet | RS232-RX | Input for data reception through RS-232 | |
| Green | AIN 2/DIN 4 | Analog input, channel 2. Input range: 0-30 V DC/Digital input channel 4 | |
| Blue | DOUT 2 | Digital output 2 |