Secure vehicle disabling

Project description

Motor vehicle theft is one of the world’s biggest concerns and the fastest growing crimes in many countries around the world. This great challenge for car rental agencies, car sharing clubs, businesses, state organizations and private car owners caused properly losses of over 6 billion US dollar globally in 2018. Luckily for them, Teltonika GPS trackers gave a remote secure engine cut-off (SECO) functionality that can help to recover a stolen vehicle and prevent the loss.

We glad that you decided to test our “Secure vehicle disabling” solution.

Here you will find how to prepare and to test this solution.

What you need for a solution?

• The secure vehicle disabling solution is supported by any Teltonika FMB series tracker which has one or more digital output (DOUT) which in this scenario is used to control fuel pump of the car.
• The SIM card in order to get data to your server.
• The secure engine cut-off (SECO) functionality is only available in Teltonika FMB series GPS trackers starting with the firmware version 03.25.10.Rev.110 or higher.
• FOTA WEB to remotely send the configuration to the device.

Installation

It’s important to well hide tracker, so it would not be a simple task for the thieves to find and unplug it. But also, please do not forget to follow mounting recommendations as well. Although devices have high gain antennas it’s important to mount devices with stickers on top and in metal-free space. The device should be firmly fixed to the surface or cables. Please make sure, that device is not fixed to heat emitting or moving parts.

During installation please follow recommendations in order to avoid damaging device and vehicle:

• Wires should be connected while the module is not plugged in.
• Be sure that after the car computer falls asleep, power is still available on the chosen wire. Depending on the car, this may happen in a 5 to 30 minutes period.
• When the module is connected, be sure to measure the voltage again if it did not decrease.
• The ground wire is connected to the vehicle frame or metal parts that are fixed to the frame.

Configuration

2. Configuring SECO scenario

Parameter ID - Parameter name GPRS settings:

GPRS Settings:

• 2001 – APN
• 2002 – APN username (if there are no APN username, empty field should be left)
• 2003 – APN password (if there are no APN password, empty field should be left)

Server settings:

• 2004 – Domain
• 2005 – Port
• 2006 – Data sending protocol (0 – TCP, 1 – UDP)

After successful GPRS/SERVER settings configuration, FMB130 device will synchronize time and update records to the configured server. Time intervals and default I/O elements can be changed by using Teltonika Configurator or SMS parameters.

System settings:

• 100 - Movement source
• 133 - Speed source

• 107 - Records Saving/Sending Without TS
• 108 - LED Indication
• 109 - GNSS Source
• 110 - Battery Charge mode
• 111 - Analog Input Value Range
• 113 - Data protocol

Sleep settings:

• 102 – Sleep settings(0 – Disable, 1 – Gps sleep, 2 – Deep sleep, 3 – Online Deep sleep, 4 – Ultra sleep)

Note: This scenario will not work with Deep Sleep and Ultra Deep Sleep since they disable the device's GSM module to save power.

SECO scenario settings:

• 12250 – Scenario priority
• 12251 – Eventual settings (0 – Disable, 1 – Enable)
• 12252 – Output Control (0 – None, 1 – DOUT1, 2 – DOUT2, 3 – DOUT3)
• 12254 - Speed (km/h)
• 12259 - Speed Pulse Scenario (km/h)
• 12255 - Speed check period (s)
• 12256 - Movement timeout (s)
• 12253 - Output Pulse (0 – Disable, 1 – Enable)
• 12257 – DOUT ON Duration (ms)
• 12258 – DOUT OFF Duration (ms)
• 7377 - Send SMS To
• 8377 – SMS text

Quick start: From default configuration to SECO detection in one SMS:

"  setparam 2001:APN;2002:APN_username;2003:APN_password;2004:Domain;2005:Port;2006:0;113:1;102:1;12250:2;12252:1"

Pharsing SECO records

1.Prerequisites:

1.2. Go to Java parser first start guide

2. Parsing example:

Unparsed received data in hexadecimal stream
00000000000000678E02000001774D66D5A8010F1267D220979FC600BE00C1050028018C0004000400EF0100 F00100B300018C010000000000000000000001774D66D990010F12663120979BFF00BE00C1050028018C0004 000400EF0100F00100B300018C020000000000000000020000A65F

AVL Data Packet
AVL Data Packet Part	HEX Code Part
Zero Bytes	00 00 00 00
Data Field Length	00 00 00 67
Codec ID	8E (Codec 8 Extended)
Number of Data 1 (Records)	02
Timestamp	00 00 01 77 4D 66 D5 A8 (Friday, January 29, 2021 9:08:41 AM)
Priority	01
Longitude	0F 12 67 D2
Latitude	20 97 9F C6
Altitude	00 BE
Angle	00 C1
Satellites	05
Speed	00 28
Event IO ID	01 8C (AVL ID: 396, Name: Seco)
of Total ID	00 04
of One Byte IO	00 04
1’st IO ID	00 EF (AVL ID: 239; Name: Ignition)
1’st IO Value	01
2’nd IO ID	00 F0 (AVL ID: 240; Name: Movement)
2’nd IO Value	01
3’th IO ID	00 B3 (AVL ID: 179; Name: Digital Output 1)
3’th IO Value	00
4’th IO ID	01 8C (AVL ID: 396, Name: Seco)
4’th IO Value	01 ( 0 - SECO DOUT OFF; 1- SECO DOUT pulsing; 2 - SECO DOUT ON)
N2 of Two Bytes IO	00 00
N4 of Two Bytes IO	00 00
N8 of Two Bytes IO	00 00
NX of X Byte IO	00 00
Timestamp	00 00 01 77 4D 66 D9 90 (Friday, January 29, 2021 9:08:42 AM)
Priority	01
Longitude	0F 12 66 3
Latitude	20 97 9B FF
Altitude	00 BE
Angle	00 C1
Satellites	05
Speed	00 28
Event IO ID	01 8C (AVL ID: 396, Name: Seco)
of Total ID	00 04
of One Byte IO	00 04
1’st IO ID	00 EF (AVL ID: 239; Name: Ignition)
1’st IO Value	01
2’nd IO ID	00 F0 (AVL ID: 240; Name: Movement)
2’nd IO Value	01
3’th IO ID	00 B3 (AVL ID: 179; Name: Digital Output 1)
3’th IO Value	00
4’th IO ID	01 8C (AVL ID: 396, Name: Seco)
4’th IO Value	02 ( 0 - SECO DOUT OFF; 1- SECO DOUT pulsing; 2 - SECO DOUT ON)
N2 of Two Bytes IO	00 00
N4 of Two Bytes IO	00 00
N8 of Two Bytes IO	00 00
NX of X Byte IO	00 00
Number of Data 2 (Number of Total Records)	02
CRC-16	00 00 A6 5F

In platform

TAVL: Open TAVL → select client → select Street Map → select device → choose the date from which to which to show the records → push advanced → push show button and then you will see in left down corner all information.