This document provides short instruction how to configure BTSMP1 Sensor and FM tracker. During
the use if you will have any questions or suggestions for improvement please feel free to contact yours Teltonika
account manager or write to technical support team over VIP helpdesk.
Wireless solutions open up new horizons for your business and help to keep an eye on your assets. Discover our
brand-new and certified Bluetooth Low Energy ID beacon and sensor models from Teltonika with robust waterproof
casing and a long-lifetime battery. The models designed for a low-cost fast and easy configuration and integration to
save precious time, resources, and ensure accountability.
About BTSMP1
Perfect for traceability use cases, delivery tracking, monitoring of various movable objects in logistics (trailers,
containers), agriculture (tractor attachments), and constructions (tools and inventory). Sensors data makes it
especially suitable for cold chain refrigerator use cases. The built-in accelerometer can detect item movement or
fall events. Magnet detection can be used for wireless open/close detection and notifications such as trailer door
events, etc. EYE sensor supports iBeacon and Eddystone protocols. The device is fully compatible with the Teltonika
firmware platform which provides extended functionality.
Configurating beacon device
Devices work constantly and are ready to perform out of the box. Default basic Sensor settings are set to:
• Transmitting at 2 dBm power.
• Data advertising at 3 second intervals.
• Eddystone protocol
If you would like to change these settings you will need to:
1) Download and install EYE APP - Teltonika application to change sensor settings.
With the application you will be able to scan for visible Teltonika EYE devices, check their statuses or connect for configuration or firmware update.
Devices in view: In this window you will see all visible devices. You have options to see devices in Short list (1) or in default list. When looking at devices in default list you will be able to open Detailed view (2) of devices and check transmitted data statuses. Additionaly if you are looking for specific devices you will be able to use Search (3) function to filter search options. When in this window select a device of your choice to connect and after passing pin code you will go to device overview window.
Overview window: In overview window you can see device details (1), check firmware version and update if available (2), go to device configuration settings. If you select to Configure (3) device new window will open with Basic and Advanced settings.
Configure window: In this window you can check and change device configuration settings. In main tab Basic Settings (1) you can change main settings. Change Device name (2.1), Power signal strength (2.2), Advertising interval (2.3) and Packet (2.4) transmition type. For more settings go to Advanced settings (3) tab to enable various events.
-20°C / +60°C (-4°F / +140°F) (Possible to have -40°C / + 85°C (-40°F / +185°F))
Protocols compatibility
iBeacon
Yes
Eddystone
Yes
Teltonika
Yes
Certificates
CE (EU)
Yes
FCC (USA)
Yes
UKCA (UK)
Yes
RoHS
Yes
E-mark
Yes
EAC, ANATEL and etc.
TBD
EN12830
TBD
Safety information
This message contains information on how to operate BTSID1 safely. By following these requirements and recommendations, you will avoid dangerous situations. You must read these instructions carefully and follow them strictly before operating the device!
1. To avoid mechanical damage, it is advised to transport the device in an impact-proof package.
2. In case of malfunction contact yours Teltonika account manager or write to technical support team over VIP helpdesk.
