Template:FMB Status info

Status info monitoring FMB1YX real time information in 5 different positions: Device info, GNSS info, GSM info, OBD/ CAN adapter info and I/O info. All this information can be saved into .HTML format with a button whitch is in device info table top right corner.
In device info user can see device name, firmware version, last device start time, RTC Time, power voltage (mV), device IMEI, SD card free space, Device uptime, Battery voltage (mV) and internal battery status.
In GNSS info user can see:

Real time GNSS status information: module status (ON, deep/GPS/Online sleep mode), how much GNSS packets device got from startup, what is fix status and what was last GNSS fix time.
Satellites information: how many and what type of satellites are visible. How many satellites are used for location positioning.
Location information: latitude, longitude, altitude, angle, HDOP, PDOP and speed.

In GSM Info user can see:

GSM status: modem status, SIM status, GPRS status, actual operator code and GSM signal level.
GPRS traffic: how much data has been send from device and received from device.
Sockets information: what server domain and port is used.
Records: how much records were sended to server from last data reset, when last record send to server was and when was last server response.
SMS count: how much FMB1YX received SMS and how much SMS was send from device.

In OBD info user can see main information from OBD (if device connected to vehicle with OBD II Bluetooth dongle adapter): vehicle VIN code and used OBD protocol.
In CAN Adapter info user can see main information from LV-CAN200/ ALL-CAN300 (if device connected to LV-CAN200/ ALL-CAN300): program number and LV-CAN200/ ALL-CAN300 SW version.
In I/O info user can see all I/O element values from all configurable I/O elements.