Wiki Knowledge Base | Teltonika GPS

Template:FMX13A First start card withoutSD

Revision as of 12:27, 25 April 2022 by Tomas.kriauciunas (talk | contribs) (Created page with "=='''How to insert {{{sim_type|Micro-}}}SIM card'''== #Gently remove {{{model|FMB1YX}}} '''cover''' using '''plastic pry tool''' from both sides. #Insert '''{{{sim_type|Micro...")

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)

How to insert Micro-SIM card

  1. Gently remove FMB1YX cover using plastic pry tool from both sides.
  2. Insert Micro-SIM card as shown with PIN request disabled or read Security info how to enter it later in Configurator. Make sure that Micro-SIM card cut-off corner is pointing forward to slot. SIM slot 1 is closer to PCB, SIM slot 2 is the upper one.
  3. Attach device cover back.
  4. Device is ready to be connected.

FMC13A cover1 correct.pngFMC13A cover2 correct.pngFMC13A cover3 correct.pngFMC13A cover4 correct.png

File:Alert morey.png
 Micro-SIM card insertion/removal must be performed when device is powered off – external voltage and internal battery disconnected. Otherwise Micro-SIM card might be damaged or device will not detect it.
Retrieved from "https://wiki.teltonika-gps.com/index.php?title=Template:FMX13A_First_start_card_withoutSD&oldid=72489"