Test Dual Cam wiki

Teltonika DualCam is connected to FMB125,FMC125 and FMB225, FMC225 devices using the RS232 interface.

• First Start
• Camera Manual
• DualCam Configuration
• DualCam Data Sending Parameters ID
• Data image/video review
• DualCam Firmware errata
• DualCam comunication protocol
• DualCam SMS commands
• DualCam update procedure
• DualCam Certifications & Approvals
• DualCam Troubleshoot

Other camera related functionality

Camera is configured if all of these conditions are met:

1. RS232 mode is selected (DualCam)
2. Camera was not configured since startup or one of the related parameters were changed (compression, framerate or OSD)
3. Camera file transfer is not active

Active camera reconfiguration is accompanied by two consecutive camera shutter clicks. If camera is disconnected and later reconnected, a device will detect it by periodic camera ping packet. Once camera is detected, the device will reissue the reconfiguration procedure.