Template:FMX9 First start card

Small and smart tracker with Bluetooth

How to insert Micro-SIM card

1. Gently remove FMB9YX cover using plastic pry tool from both sides.
2. Insert Micro-SIM card as shown with PIN request disabled or read Security info how to enter it later in Configurator. Make sure that Micro-SIM card cut-off corner is pointing forward to slot.
3. Attach device cover back.
4. Device is ready to be connected.

1. Gently remove FMB9YX cover using plastic pry tool from both sides.
2. Insert Micro-SIM card as shown with PIN request disabled or read Security info how to enter it later in Configurator. Make sure that Micro-SIM card cut-off corner is pointing forward to slot.
3. Remove the adhesive tape protection.
4. Place the battery inside the casing of the FMB9YX. Make sure the adhesive tape sticks to the casing.
5. Connect the internal battery to the FMB9YX PCB.
6. Attach device cover back. Device is ready to be connected.

Micro-SIM card insertion/removal must be performed when device is powered off – external voltage and internal battery disconnected. Otherwise Micro-SIM card might be damaged or device will not detect it.