Status info monitors FMB120 real time information in 5 different positions: Device info, GNSS info, GSM info, OBD/CAN adapter info and I/O info. All this information can be saved into .HTML file with a button which is in top right corner of the device info table.
In device info user can see device name, firmware version, last device start time, RTC Time, power voltage (mV), device IMEI, SD card free space, Device uptime, Battery voltage (mV) and internal battery status.
In GNSS info user can see:
- Real time GNSS status information: module status (ON, deep/GPS/Online sleep mode), how many GNSS packets device received from startup, what is fix status and what was the last GNSS fix time.
- Satellite information: how many and what type of satellites are visible. How many satellites are used for location positioning.
- Location information: latitude, longitude, altitude, angle, HDOP, PDOP and speed.
In GSM Info user can see:
- GSM status: modem status, SIM status, GPRS status, actual operator code and GSM signal level.
- GPRS traffic: how much data has been sent and received by the device.
- Sockets information: which server domain and port is used.
- Records: how many records were sent to server from last data reset, when last record was sent to server and when was last server response.
- SMS count: how many SMS FMB120 received and how many SMS were sent from the device.
In OBD info user can see main information from OBD (if device connected to vehicle with OBD II Bluetooth dongle adapter): vehicle VIN code and used OBD protocol.
In CAN Adapter info user can see main information from LV-CAN200/ALL-CAN300 (if device connected to LV-CAN200/ALL-CAN300): program number and LV-CAN200/ALL-CAN300 SW version.
In I/O info user can see all I/O element values from all configurable I/O elements.