TFT100 LED behavior description
Revision as of 11:14, 8 March 2023 by Martyna.D (talk | contribs) (Created page with "{{Template:FMB1 LED status |model=TFT100 |CAN_status= }} Category:TFT100 Manual")
Main Page > E-Mobility Trackers > TFT100 > TFT100 Manual > TFT100 LED behavior description
This section is an explanation of LED indications on an TFT100 device.
| Behaviour | Meaning |
|---|---|
| Permanently switched on | GNSS signal is not received |
| Blinking every second | Normal mode, GNSS is working |
| Off | GNSS is turned off because: Device is not working or Device is in sleep mode |
| Blinking fast constantly | Device firmware is being flashed |
Status LED Indications
| Behaviour | Meaning |
|---|---|
| Blinking every second | Normal mode |
| Blinking every two seconds | Sleep mode |
| Blinking fast for a short time | Modem activity |
| Off | Device is not working or Device is in boot mode |