| VERSION
|
RELEASE DATE
|
CONFIGURATOR CHANGES
|
FIRMWARE CHANGES
|
55.01.02.Rev.01
1.6.11_R.30
|
2021.10.25
|
- Change No Movement/Movement event SMS text
- Added Race Mode feature
|
- Added Race Mode for GNSS data live tracking
- Fixed LED indication stuck when Man-Down Cancel button is pressed
- Fixed FW version display in FOTA WEB
- Fixed possibility to configure forbidden GNSS source via SMS or GPRS
- Fixed fake movement events when Low power mode is used
- Fixed BLE scan stuck when Xiaomi bracelet is used
- Fixed restarts when Beacon on Demand feature is used for longer time
- Fixed Alarm call delay issue
- Fixed FW update issue with XT26G01CWSIGT flash
- Added XT26G01CWSIGT and GD5F1GQ5UE NAND flash support
- Changed minimum charging temperature from -10°C to 1°C
- SMS commands will return time with applied time zone
- The maximum battery charging temperature changed from 50°C to 45°C
- Maximum operating temperature changed from 65°C to 59°C
|
55.00.21.Rev.00
1.6.11_R.26
|
2021.08.10
|
- Added Tool tips information about Beacon record mode 'No Send'.
- 'Data Acquisition' tool tips and labels changed.
- Changed BLE 'Update frequency' name and tool tips.
- Amber Alert tool tip changes.
- Amber Alert timeout name changed.
|
- Xiaomi Mi Band 2 support.
- Added possibility to Enable or Disable Mandown/Movement/No Movement features while charging.
- Fixed invalid SMS number when reporting position after call.
- Accelerometer improvements.
- Minor changes
|
55.00.18.Rev.02
1.6.11_R.23
|
2021.05.13
|
|
- Fixed issue which occurred during manufactory testing phase with Ver.55.00.18.Rev.01 where device could end with GNSS State = 0
|
55.00.18.Rev.01
1.6.11_R.23
|
2021.05.07
|
- Increased Beacon List from 25 to 100
- Added On Demand Tracking On/Off/Switch button action
- Added On Demand Tracking event indication settings
- Enabled vibration for Call Active indication.
|
- Increased Configured beacons count from 25 to 100
- If Beacon record sending is configured to be 'Eventual', send only if device sees any beacons
- Improved Power On/Off feature notifications
- Power save mode is working with Data Acquisition time 60s and above
- On Demand Tracking functionality improved with button control and On Demand Tracking event indication
- ManDown functionality was improved with additional sensing methods. First one FreeFall sensing and other FreeFall with Angle combination
- Mandown Cancel button functionality added
- Fixed constant or uncontrolled Battery LED On state
- Added configurable outgoing alarm tone sound
|
55.00.13.Rev.00
1.6.11_R.18
|
2021.01.14
|
- Added GNSS Fix Holdout settings
- Added Outgoing Call in loudspeaker settings
- Added No movement pre-alarm indication settings
|
- Added Power off button disable feature.
- Special function added: GPS search on hold for 30 seconds.
- Fixed Power on/off event feature.
- Changed Call logic between simultaneous alarms.
- Fixed device Power on from USB, when feature is disabled.
- Added possibility to update GNSS coordinate every 1sec.
- Safe charging improvements.
- Reworked On Demand Tracking.
- Changed Call and SMS logic for Man-Down feature.
|
55.00.10.Rev.01
1.6.11_R.16
|
2020.11.13
|
- Added Last Known Position feature settings
- Added Power On/Off event settings
- Added amber alert feature settings (for GH5200)
- Added Amber alert indication (for GH5200)
- Added Amber alert settings on a keyboard (for GH5200)
- Added Power off with Power key settings
- Added Custom BLE I/O parameters
- Added Man-Down Event On Exit and On Entrance parameters
|
- Added Amber Alert feature with configurable event Timeout and pre-alarm.
- Improved ManDown, AutoGeofence, Alarm button and Amber Alert maximum call list to 10 numbers.
- Changed outgoing call indication to vibration only.
- Added Last Known Position feature on HIGH priority event (alarm, amber alert, man-down, etc.)
- When GH5200 gains current GPS position after HIGH priority event was generated, device sends another HIGH priority event with updated position and GPS fix timestamp.
- Added outgoing call in loudspeaker mode once the call is established.
- Reworked GNSS status SMS template.
|
55.00.05.Rev.01
1.5.0_C.007
|
2020.03.06
|
- Removed unnecessary Low Power parameters
- Removed unnecessary Time Synchronization settings
- Implemented On Demand tracking functionality
- Removed unnecessary Number Check Settings panel
- Implemented Event Notification functionality
- Implemented User ID functionality
- Improved BLE beacon functionality
- Implemented Beacon List functionality
- Improved User Interface configuration panel
- Improved Keyboard configuration panel
- Implemented Button IO feature
- Updated default settings
|
- Reworked factory test tool.
|
55.00.05.Rev.00
1.5.0_C.007
|
2020.02.13
|
- Removed unnecessary Low Power parameters
- Removed unnecessary Time Synchronization settings
- Implemented On Demand tracking functionality
- Removed unnecessary Number Check Settings panel
- Implemented Event Notification functionality
- Implemented User ID functionality
- Improved BLE beacon functionality
- Implemented Beacon List functionality
- Improved User Interface configuration panel
- Improved Keyboard configuration panel
- Implemented Button IO feature
- Updated default settings
|
- Reworked User Interface configuration.
- Reworked Keyboard configuration.
- Implemented Event Notification panel.
- Implemented Call After Answer functionality
- Implemented User ID functionality.
- Implemented On Demand data acquisition functionality.
- Implemented Button IO Feature.
- Optimized wake up from deep sleep by movement.
- Updated default settings.
- Improved BLE compatibility with beacons.
|