Initiates all data sending by GPRS to specified target server. Comma separated parameters go as numbered:
- # - IMEI
- # - APN
- # - GPRS LOGIN
- # - GPRS PASSWORD
- # - IP
- # - PORT
- # - MODE (0-TCP/1-UDP)
Example:user psw flush 353976012555151,banga,,,212.47.99.62,12050,0
Answer:FLUSH SMS Accepted. 11 records found on FLASH. Minimum Records to Send: 1. GPRS Enabled: 1. Time Sync: 1
| Response details | Description | Description |
|---|---|---|
| FLUSH SMS Accepted | FLUSH SMS Accepted | FLUSH SMS Accepted |
| # records found on FLASH | Number of records found on FLASH | 11 records found on FLASH |
| Minimum Records to Send: # | Number of minimum saved records to send | Minimum Records to Send: 1 |
| GPRS Enabled: # | State of the GPRS connection: 0 – Disabled |
GPRS Enabled: 1 |
| Time Sync: # | Indicates time synchronization on the device: 0 – Not synchronized |
Time Sync: 1 |
NOTE! Parameters are separated by comma (no spaces needed). In case you do not need to enter parameter (APN Login/APN Pass) – do not put space, simply put comma and enter next parameter.