TMT250 First Start
Revision as of 13:36, 13 April 2023 by Martyna.D (talk | contribs) (Protected "TMT250 First Start" ([Edit=Allow only administrators] (indefinite) [Move=Allow only administrators] (indefinite)))
Main Page > Autonomous Trackers > TMT250 > TMT250 First Start
How to insert micro SIM card and connect the battery to TMT250
- Unscrew 4 screws counterclockwise.
- Remove the cover.
- Insert Micro-SIM card as shown. Make sure that Micro-SIM card cut-off corner is pointing forward to slot.
- Connect the battery as shown to the device.
- Attach device cover back and screw in all 4 screws.
- Device is ready to be used.
- NOTE: In order to prevent device's cover from mechanical damage it is recommended to use screwdriver, which is included in the package.
Correct Battery Connection
Template:SAS first start config