Wiki Knowledge Base | Teltonika GPS

EYE APP errata

Revision as of 14:18, 6 October 2023 by Mazvydas.bernotas (talk | contribs)

EYE APP > EYE APP errata

FOR EYE BEACON and EYE SENSOR DEVICES

EYE APP suitable for: BTSID1, BTSMP1

EYE APP VERSION FIRMWARE VERSION RELEASE DATE CHANGES
  1.2.1-81 <=1.2.8.R.2 2023.09.29

[Fixed]:

  • Crash fix when saving settings
  • Formatted values from cfg file
  • Improved ignoreMagneticField funct
  • Device disconnection after setting
  • The old FW update flow changes
  • Unblocked device connection task
  1.2.1-80 <=1.2.8.R.2 2023.08.25

[Fixed]:

  • Packet settings choices for BTSID with HALL and without
  • Device crashing during saving
  • Show disconnection popup in PIN screen
  • Disconnection detection and PIN entry checks
  • Save TX Power configuration
  • Switched handler argument to base64 instead of raw data, fixed
  1.2.1-79 <=1.2.8.R.2 2023.07.31

[New]:

  • Change device name length to 12

[Fixed]:

  • Updated Active Sensors display conditions
  • Removed Inactivity Window on older FW
  • Upload CFG EddystoneID problem
  • Android SDK 33 write permissions
  • Change device name length to 12
  • iOS fixes for device scanning & app crashing
  1.2.1-65 <=1.2.8.R.2 2023.05.08

[Fixed]:

  • Sensor Card changes for BTSIDAuto Disconnect feature theme changes
  • Active Sensors & Sensor Card relationsSensor Card changes for BTSID
  • Remove SentryActive Sensors & Sensor Card relations
  • Configuration upload doesn't save txPower, iBeacon&Eddsytone IDRemove Sentry
  • MacQR only android, fitting of input container
  • hardware backpress will disconnect in PIN and PUK screensConfiguration upload doesn't save txPower, iBeacon&Eddsytone ID
  • password counter time calc
  • Double-check establishing connection
  • Device stays connected on Locked Device screen
  • PIN Entry getting stuck
  • Reworked Auto Disconnect feature
  • Dynamic Keep Session text based on FW status
  • Battery Level on BTSID devices
  • Magnetic Field shown as NA in Device Details
  • Beacon visibility lost for connected devices
  • Nondiscoverable iBeacon devices on older FW
  • Update via file option crashing application
  1.2.1-1 <=1.2.8.R.2 2023.03.03

[New]:

  • auto disconnect feature
  • specID specific update mechanism
  • Upgrade Firmware from file
  • Added battery level indication
  • Scan QR code to find device
  • Upload device configuration
  • Active Sensors Implementation

[Fixed]:

  • Added Revision and specID data to FW Update screen
  • Keep alive functionality on unsupported FW
  • Updated settings validation rules with regular expressions
  • Device locked screen counts down timeout
  • Reworked inactivity func.
  • Sensor card not visible on BTSMP1
  • PUK block-lock mistake
  • Change password popup message
  • Advertising interval minimum 1s
  • PIN updated popup to device screen after PUK validation
  1.2.0-63 <=1.2.8.R.2 2023.04.21 [Fixed]:
  • Sensor information will not update after saving configuration until the user connects at least once.

  1.2.0-60

<=1.2.8.R.2 2023.03.29

[New]:

  • Change PIN functionality: Users can now change the PIN of their device directly from the app, making it easier to secure their device.
  • Download configuration functionality: Users can now download configurations from their device to the app, making it easier to manage multiple configurations.
  • Firmware revision representation: Users can now view the firmware revision of their device in the app, helping them to keep their device up to date.
  • Saving configuration has loading screen: A loading screen has been added to let users know when their configuration has been successfully saved.
  • Removal of Advanced Settings: Sensor Event configuration: This feature has been removed to simplify the app interface.

[Fixed]:

  • Android 13 devices can now download the app without any issues.
  • We've corrected the display of NamespaceID and InstanceID when not connected to their device.
  • We've fixed a bug that caused their PIN to change accidentally when connecting to their device repeatedly.
  • Bluetooth permissions are now working correctly, ensuring a seamless connection with their device.
  • Firmware update issues for Huawei phones have been resolved.
  • Links from the side menu now work as expected.

[Known Issues]:

  • Sensor information will not update after saving configuration until the user connects at least once. This issue will be fixed in the next EYE app version that should release soon.
  • 1.2.8.R.2 firmware version devices are shown as 1.2.8.R.1. This issue is not EYE APP issue, it is firmware related and therefore will be fixed with a future firmware update.
Retrieved from "https://wiki.teltonika-gps.com/index.php?title=EYE_APP_errata&oldid=89466"