Page defines configurator parameter changes in different base firmware versions.
Default Parameters Values Update in 03.29.00 firmware versions
Starting from firmware version 03.29.00.Rev.04 default values of some parameters were updated to provide more comfortable out of the box solution for all clients. List of parameter changes:
| Parameter ID | Name | Default value in 03.27.XX firmware versions | Default value in 03.29.XX firmware versions |
| 113 | Data Protocol | 0 - (Codec 8) | 1 - (Codec 8 Extended) |
| 902 | Time Synchronization / NTP Server 1 | avl1.teltonika.lt | pool.ntp.org |
| 903 | Time Synchronization / NTP Server 2 | pool.ntp.org | time.nist.gov |
| 102 | Sleep Mode / Sleep Settings | 2 - (Deep Sleep) | 3 - (Online Deep Sleep) |
| 103 | Sleep Mode / Sleep Timeout (minutes) | 1440 | 120 |
| 234 | Assisted GPS Settings / Allow AGPS in Home Network | 1 - (Enable) | 0 - (Disabled) |
| 11004 | Eco/Green Driving / Max Acceleration (m/s^2) | 2.50 | 2.31 |
| 11005 | Eco/Green Driving / Max Braking (m/s^2) | 2.70 | 2.52 |
| 11006 | (Eco/Green Driving / Max Cornering (rad/s) | 3.40 | 2.94 |
| 11502 | Unplug Detection / Unplug Detection Mode | 0 - (Simple) | 1 - (Advanced) |
| 11407 | (Crash Detection / Duration (ms) | 20 | 10 |
| 11406 | Crash Detection / Crash Trace | 0 - (Disable) | 2 - (Trace Full) |
| 20101,20121,20141, etc | Manual Geofence / X geozone / Generate Event | 0 - (No Event) | 3 - (On Both) |
| 11816 | BT 4.0 / Scan retries until error (seconds) | 30 | 10 |
| 45002 | CAN Adapter / Program number | 0 | 11120 |
| 11661 | Towing / Data Acquisition Change | 0 - (None) | 1 - (Low) |
| 40280 | OBDII / Fuel Level / Priority | 0 - (None) | 1 - (Low) |
| 40410 | OBDII / VIN / Priority | 0 - (None) | 1 - (Low) |
| 40440 | OBDII / OEM Fuel Level / Priority | 0 - (None) | 1 - (Low) |
| 40430 | OBDII / OEM Total Mileage / Priority | 0 - (None) | 1 - (Low) |
| 40420 | OBDII / Fault Codes / Priority | 0 - (None) | 1 - (Low) |
| 40410 | OBDII / Number of DTC / Priority | 0 - (None) | 1 - (Low) |
| 40400 | (OBDII / Fuel Rate / Priority) | 0 - (None) | 1 - (Low) |
| 40160 | OBDII / Engine RPM / Priority) | 0 - (None) | 1 - (Low) |
| 40170 | OBDII / Vehicle Speed / Priority | 0 - (None) | 1 - (Low) |
| 40110 | OBDII / Engine Load / Priority | 0 - (None) | 1 - (Low) |
| 40370 | OBDII / Hybrid battery pack remaining life / Priority | 0 - (None) | 1 - (Low) |
| 40120 | OBDII / Coolant Temperature / Priority | 0 - (None) | 1 - (Low) |
| 40230 | OBDII / Distance traveled MIL on / Priority | 0 - (None) | 1 - (Low) |
Removal of I/O elements' "Send SMS To" and "SMS Text" parameters in 03.29.00 firmware versions
Starting from firmware version 03.29.00.Rev.00 seperate "Send SMS To" and "SMS Text" parameters that were used for each of I/O elements and Manual Geofence were removed due to implemented rework. Newest iteration of "SMS Events" functionality now has seperate section with new options to configure preferred SMS Events and their text. Functionality changes defined in wiki page SMS events
| Name | Removed parameters | New parameters in 03.29.XX firmware versions |
| SMS Text |
I/O, CAN Adapter and OBDII Sections: 8000, 8001, 8002, 8003, 8004, 8005, 8006, 8007, 8008, 8009, 8010, 8011, 8012, 8013, 8014, 8015, 8016, 8017, 8018, 8019, 8020, 8021, 8022, 8023, 8024, 8069, 8070, 8116, 8117, 8118, 8119, 8120, 8121, 8122, 8123, 8124, 8125, 8126, 8127, 8128, 8129, 8130, 8131, 8132, 8133, 8134, 8135, 8136, 8137, 8138, 8139, 8220, 8243, 8250, 8376, 8038, 8039, 8040, 8041, 8042, 8043, 8044, 8045, 8046, 8047, 8048, 8049, 8050, 8051, 8052, 8053, 8054, 8055, 8056, 8057, 8058, 8059, 8060, 8061, 8062, 8063, 8633, 8064, 8065, 8066, 8067, 8068, 8524, 8525, 8526, 8527, 8264, 8241, 8522, 8529, 8628, 8634, 8635 Manual Geofence Section: 8025, 8026, 8027, 8028, 8029, 8071, 8072, 8073, 8074, 8075, 8076, 8077, 8078, 8079, 8080, 8081, 8082, 8083, 8084, 8085, 8086, 8087, 8088, 8089, 8090, 8091, 8092, 8093, 8094, 8095, 8096, 8097, 8098, 8099, 8100, 8101, 8102, 8103, 8104, 8105, 8106, 8107, 8108, 8109, 8110, 8111, 8112, 8113, 8114 |
9252, 9255, 9258, 9261, 9264, 9267, 9270, 9273, 9276, 9279 |
| Send SMS To |
I/O, CAN Adapter and OBDII Sections: 7000, 7001, 7002, 7003, 7004, 7005, 7006, 7007, 7008, 7009, 7010, 7011, 7012, 7013, 7014, 7015, 7016, 7017, 7018, 7019, 7020, 7021, 7022, 7023, 7024, 7069, 7070, 7716, 7117, 7117, 7119, 7120, 7121, 7122, 7123, 7124, 7125, 7126, 7127, 7128, 7129, 7130, 7131, 7132, 7133, 7134, 7135, 7136, 7137, 7138, 7139, 7220, 7243, 7250, 7376, 7038, 7039, 7040, 7041, 7042, 7043, 7044, 7045, 7046, 7047, 7048, 7049, 7050, 7051, 7052, 7053, 7054, 7055, 7056, 7057, 7058, 7059, 7060, 7061, 7062, 7063, 7663, 7064, 7065, 7066, 7067, 7068, 7524, 7525, 7526, 7527, 7264, 7241, 7522, 7529, 7628, 7634, 7635 Manual Geofence Section: 7026, 7027, 7028, 7029, 7071, 7072, 7073, 7074, 7075, 7076, 7077, 7078, 7079, 7080, 7081, 7082, 7083, 7084, 7085, 7086, 7087, 7088, 7089, 7090, 7091, 7092, 7093, 7094, 7095, 7096, 7097, 7098, 7099, 7100, 7101, 7102, 7103, 7104, 7105, 7106, 7107, 7108, 7109, 7110, 7111, 7112, 7113, 7114, 7115 |
9251, 9254, 9257, 9260, 9263, 9266, 9269, 9272, 9275, 9278 |
| SMS Events AVL ID | Not available before | 9250, 9253, 9256, 9259 ,9262, 9265, 9268, 9271, 9274, 9277 |
Main list of currently used parameters and their description can be found in link Parameter list