FMT100 Product Change Notifications

Main Page > Fast & Easy Trackers > FMT100 > FMT100 Product Change Notifications

Product change notifications (PCN) is the way of informing customers of upcoming changes related to Teltonika products. This includes outward appearance adjustments, hardware improvements, firmware changes, changes to package contents, etc. This page stores information regarding changes to the FMT100 tracking device. Below you will find a list of both upcoming and already implemented changes sorted from newest to oldest (top to bottom).

2024.05.13: Base firmware update

We would like to inform you about the base firmware update for FMT100 starting from June, 2024. New production firmware version will be 03.29.00.Rev.18

Change description
Change type Firmware update
Detailed description Key improvements from last production firmware are listed in errata: FMT100 firmware errata
Old version:
03.29.00.Rev.13
New version:
03.29.00.Rev.18
Change reasons FMT100 base firmware version update
Product release date 2024 June
Affected products
Model Affected order codes Order code changes
FMT100 Order codes with base Firmware New firmware version
Change impact
Risk assessment Client's special firmware versions or order codes with special firmware will not be updated to latest base firmware automatically. During the transition period clients might receive devices with previous Firmware version used in manufacture.
Suggested implementation plan If you are using special firmware version and would like an upgrade to new features of latest base firmware, please contact your Teltonika sales manager.

2023.10.25: GNSS antenna changes

We would like to inform you about the GNSS antenna change for FMT100 starting from October 2023.

Change description
Change type Mechanical part changes
Detailed description
Old version:  


Antenna size: 35x35x3 mm
Center frequency: 1575.42 MHz, 1602 MHz
VSWR: <1.8
Average gain: -1.3 dB
Return loss: < -14 dB

New version:  


Antenna size: 25x25x4 mm
Center frequency: 1575.42 MHz, 1602 MHz
VSWR: <1.2
Average Gain: -1.2 dB
Return loss < -29 dB

Change reasons Standardization of GNSS antennas throughout device portfolio and manufacturing efficiency improvements
Product release date October 2023
Affected products
Model Affected order codes Order code changes
FMT100 FMT100******* order codes No changes
Change impact
Risk assessment Since the change of the GNSS antenna is visible visually on PCB, in order to avoid problems at the customs of certain countries, we suggest informing the relevant authorities about the change of the GNSS antenna as soon as possible. The new GNSS antenna provides an equivalent track quality and performance level, as verified through testing. Testing results:
Device Antenna Mounting conditions* Avg. Difference
from precise track** [m]
FMT100_162 New Excellent 2,59
FMT100_745 Old Excellent 4,43
FMT100_170 New Good 3,45
FMT100_937 Old Good 4,68
FMT100_238 New Normal 3,93
FMT100_705 Old Normal 4,92
FMT100_071 New Poor 4,98
FMT100_638 Old Poor 5,05

*Mounting conditions - device position under the hood from a poor location (thick metal layer above device) to an excellent location (thin metal layer above device)
**Avg. Difference from precise track - measured by comparing positioning data from devices and RTK (Real-time kinematic positioning) system data which is considered precise data. The smaller avg. difference from precise track, means better track quality.

Suggested implementation plan No implementation plan needed

2022.08.01: Base firmware update

We would like to inform you about the base firmware update for FMT100 starting from August 1st, 2022. New production firmware version will be 03.27.13.Rev.03

Change description
Change type Firmware update
Detailed description Key improvements from last production firmware are listed in errata: https://wiki.teltonika-gps.com/view/FMT100_firmware_errata
Old version:
FMT100 03.27.07.Rev.00
New version:
FMT100 03.27.13.Rev.03
Change reasons FMT100 base firmware version update
Product release date 2022 August
Affected products
Model Affected order codes Order code changes
FMT100 FMT100******* order codes with base Firmware Update firmware
Change impact
Risk assessment Client's special firmware versions or order codes with special firmware will not be updated to latest base firmware automatically. During the transition period clients might receive devices with previous Firmware version used in manufacture.
Suggested implementation plan If you are using special firmware version and would like an upgrade to new features of latest base firmware, please contact your Teltonika sales manager.

2021.10.01: Casing Change

We would like to inform you about the Casing change for FMT100 starting from October, 2021.

Change description
Change type Casing change
Detailed description New FMT100 casing material
Old version:

New version:
Change reasons Increased FMT100 demand requires to switch for materials with better availability
Product release date 2021 October
Affected products
Model Affected order codes Order code changes
FMT100 All order codes with standard casing New casing
Change impact
Risk assessment Casing Standard for Safety of Flammability UL 94 rating remains V-0 so CE and E-mark certificates are valid. Both casings conform to IP65 standard.
Suggested implementation plan No implementation plan needed

2021.08.13: Base firmware update

We would like to inform you about the base firmware update for FMT100 starting from August 13th, 2021. New production firmware version will be 03.27.07.Rev.00

Change description
Change type Firmware update
Detailed description Key improvements from last production firmware are listed in errata: https://wiki.teltonika-gps.com/view/FMT100_firmware_errata
Old version:
FMT100 03.25.18.Rev.08
New version:
FMT100 03.27.07.Rev.00
Change reasons FMT100 base firmware version update
Product release date 2021 August
Affected products
Model Affected order codes Order code changes
FMT100 FMT100******* order codes with base Firmware Update firmware
Change impact
Risk assessment Client's special firmware versions or order codes with special firmware will not be updated to latest base firmware automatically. During the transition period clients might receive devices with previous Firmware version used in manufacture.
Suggested implementation plan If you are using special firmware version and would like an upgrade to new features of latest base firmware, please contact your Teltonika sales manager.

2021.07.07: Hardware change

We would like to inform you about the hardware change for FMT100 starting from July of 2021.

Change description
Change type Hardware change
Detailed description Internal gyroscope with accelerometer changed to accelerometer only
Old version:
FMT100 with accelerometer and gyroscope
New version:
FMT100 with accelerometer
Change reasons Response to the global situation in component market and streamlining our product portfolio
Product release date 2021 July
Affected products
Model Affected order codes Order code changes
FMT100 FMT100******* Gyroscope changed to accelerometer
Change impact
Risk assessment Current CE and E-mark certificates are valid. Also, current purchase codes remain the same.
Suggested implementation plan In cases when FMT100 devices with gyroscope are needed for special projects, please contact your Teltonika Telematics sales manager for further assistance.


2021.04.30: Base firmware update

We would like to inform you about the base firmware update for FMT100 starting from April 30th, 2021. New production firmware version will be 03.25.18.Rev.08.

Change description
Change type Firmware update
Detailed description Key improvements from last production firmware are listed in errata: https://wiki.teltonika-gps.com/view/FMT100_firmware_errata
Old version:
FMT100 03.25.18.Rev.05
New version:
FMT100 03.25.18.Rev.08
Change reasons FMT100 base firmware version update
Product release date 2021 April 30th.
Affected products
Model Affected order codes Order code changes
FMT100 FMT100******* order codes with base Firmware Update firmware
Change impact
Risk assessment Client's special firmware versions or order codes with special firmware will not be updated to latest base firmware automatically
Suggested implementation plan If you are using special firmware version and would like an upgrade to new features of latest base firmware, please contact your Teltonika sales manager.


2021.04.30: Top Laser Printing Changes

We would like to inform you, that laser printing of the FMT100 device was updated in the factory from April 2021.

Change description
Change type External/visual
Detailed description Top laser printing design changed
Old version:
New version:
Change reasons 1. Updated Emark certificate number
Product release date April 2021
Affected products
Model Affected order codes Order code changes
FMT100 FMT100******* New casing
Change impact
Risk assessment No risk factors encountered with this change
Suggested implementation plan Due to changes in device appearance we strongly recommend to contact your customs agent with our change log information, to avoid any unexpected delays in customs clearance process
Acknowledgement of PCN receipt
If no feedback is received within two weeks after the issue date of this notification - Teltonika may accept that this change has been tacitly accepted and can implement the change as indicated above


2021.02.08: Base firmware update

We would like to inform you about the base firmware update for FMT100 starting from February 26th, 2021. New production firmware version will be 03.25.18.Rev.05.

Change description
Change type Firmware update
Detailed description Key improvements from last production firmware are listed in errata: https://wiki.teltonika-gps.com/view/FMT100_firmware_errata
Old version:
FMT100 03.25.18.Rev.03
New version:
FMT100 03.25.18.Rev.05
Change reasons FMT100 base firmware version update
Product release date 2021 February 26th.
Affected products
Model Affected order codes Order code changes
FMT100 FMT100******* order codes with base Firmware Update firmware
Change impact
Risk assessment Client's special firmware versions or order codes with special firmware will not be updated to latest base firmware automatically
Suggested implementation plan If you are using special firmware version and would like an upgrade to new features of latest base firmware, please contact your Teltonika sales manager.


2019.11.11: Standard Pack Quantity Changes

We would like to inform you, that Standard Pack Quantity (SPQ) for FMT100 will be changed from November.

Change description
Change type Packaging
Detailed description Changed Standard Pack Quantity (SPQ) from 20 to 15
Old version:
New version:
Change reasons More secure packaging for transportation
Product release date Planned date: 2019 November
Affected products
Model Old order codes New order code
FMT100 FMT1001AJA01 (SPQ: 20) FMT1001AFD01 (SPQ: 15)
FMT100 FMT1001AFIO8 (SPQ: 20) FMT1001AGBO8 (SPQ: 15)
FMT100 FMT1001AEOO8 (SPQ: 20) FMT1001ASZO8 (SPQ: 15)
FMT100 FMT1001AOWU2 (SPQ: 20) FMT1001AJRU2 (SPQ: 15)
FMT100 FMT1001A4PN1 (SPQ: 20) FMT1001AZNN1 (SPQ: 15)
FMT100 FMT1001AWPO8 (SPQ: 20) FMT1001AJZO8 (SPQ: 15)
FMT100 FMT1001AHH01 (SPQ: 20) FMT1001AOD01 (SPQ: 15)
FMT100 FMT1001AOUU2 (SPQ: 20) FMT1001AEXU2 (SPQ: 15)
FMT100 FMT1001AOX9I (SPQ: 20) FMT1001AMS9I (SPQ: 15)
FMT100 FMT1001AYDTG (SPQ: 20) FMT1001AYPTG (SPQ: 15)
FMT100 FMT1001AD9D7 (SPQ: 20) FMT1001AYPD7 (SPQ: 15)
FMT100 FMT1001AJA4H (SPQ: 20) FMT1001AOG4H (SPQ: 15)
FMT100 FMT1001AJA4H (SPQ: 20) FMT1001AOG4H (SPQ: 15)
FMT100 FMT1002AWPO8 (SPQ: 20) FMT1002AJZO8 (SPQ: 15)
FMT100 FMT1001AJHUN (SPQ: 20) FMT1001ACSUN (SPQ: 15)
FMT100 FMT1001AUN01 (SPQ: 20) FMT1001AUF01 (SPQ: 15)
Change impact
Risk assessment No risk factors encountered with this change
Suggested implementation plan No implementation plan needed
Acknowledgement of PCN receipt
If no feedback is received within two weeks after the issue date of this notification - Teltonika may accept that this change has been tacitly accepted and can implement the change as indicated above

To download the pdf version of this notification, click here.