How to Install FMC650 on DAF XF

Main Page > Professional Trackers > FMC650 > FMC650 Manual > How to Install FMC650 on DAF XF

1 FMB + DAF.png

Installation proccess

Below is shown main installation location:

Carefully unscrew the fuse panel screws and fold the panel down.

Where to find main connector?

Connect the wires accordingly. It is recommended to use DIN 1 instead of DIN 3 for ignition detection.

After installation and device configuration of FMC650 (CAN1 should be selected – FMS/TACHO), you can check if installation is properly made. Turn on ignition of vehicle and send SMS command: “ tachocheck”. If response shows: “Can1:111,F2EF”, 111 -means tachograph properly connected, F2EF - or any other value which is not equal to 0000, means FMS data received also.

Retrieved from "https://wiki.teltonika-gps.com/index.php?title=How_to_Install_FMC650_on_DAF_XF&oldid=71064"