0
edits
Changes
Template:FMB Accelerometer Features settings (view source)
Revision as of 16:28, 8 May 2018
, 16:28, 8 May 2018→Towing Detection
# Ignition (configured Ignition Source) is OFF.
# Ignition (configured Ignition Source) is OFF.
# Activation Timeout (set in Towing detection features) is reached.
# Activation Timeout (set in Towing detection features) is reached.
When Activation Timeout is reached and Ignition is still in OFF state, FMB1YX monitors accelerometer data. If Acceleration or Angle value reaches configured threshold for configured Duration (in ms), check Ignition state. If Ignition is still OFF during configured "Ignition check after Event Timeout" time, then event is generated. If configured - sends sms event or makes a call. Function will be reactivated after FMB1YX again detects change of Ignition state from ON to OFF.
Activation timeout – Activation timeout is time after which FMB1YX turns ON Towing detection function if other requirement is met (Ignition OFF state detected). It is measured in minutes.
Event timeout – defines time period (in seconds) to check ignition state when Acceleration or Angle value reach. If towing event is generated during this time period, it is skipped. It allows filtering out redundant towing events while entering the car.
Make Call to – if function enabled makes call to specified phone number (configured in predefined numbers).
Threshold and Angle – values used to detect towing when ignition is OFF.
Duration – defines time period to check Acceleration and Angle values.
<br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/>
<br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/>