Changes

System settings have following configurable parameters:

System settings have following configurable parameters:

* ''Sleep Settings'', where user can choose sleep mode;

* ''Sleep Settings'', where user can choose sleep mode;

* ''Ignition Source'', where user can choose an ignition source from power voltage, digital input 1, accelerometer and engine RPM. More than one ignition source can be selected at the same moment. User can select movement start and movement stop delay time - those parameters are used when accelerometer is selected as an ignition source. Ignition status is used in power management and the following functionalities: eco driving, excessive idling, fuel consumption, over speeding, towing and trip.

* ''Ignition Source'', where user can choose an ignition source from power voltage, digital input 1, accelerometer and engine RPM. More than one ignition source can be selected at the same moment. User can select movement start and movement stop delay time - those parameters are used when accelerometer is selected as an ignition source. Ignition status is used in power management and the following functionalities: eco driving, excessive idling, fuel consumption, over speeding, towing and trip;

* Object motion detection settings, where user can configure 4 ways how {{{model|FMB1YX}}} detects movement and change its working mode (for more information refer to section {{{ctrDaq|[[Template:FMB Data acquisition settings]]}}}). Other functionalities that depend on movement source are: power manager, fuel consumption and trip.

* Object motion detection settings, where user can configure 4 ways how {{{model|FMB1YX}}} detects movement and change its working mode (for more information refer to section {{{ctrDaq|[[Template:FMB Data acquisition settings]]}}}). Other functionalities that depend on movement source are: power manager, fuel consumption and trip;

* ''Static Navigation Settings'', where user can turn static navigation on or off. Additionally, user can choose which source (movement or ignition) is used to activate/deactivate static navigation.

* ''Static Navigation Settings'', where user can turn static navigation on or off. Additionally, user can choose which source (movement or ignition) is used to activate/deactivate static navigation;

* Records settings (no time synchronization), where user can enable or disable records when GPS is not available.

* Records settings (no time synchronization), where user can enable or disable records when GPS is not available;

* ''GNSS Source'' settings, where user can choose the necessary satellite system(s).

* ''GNSS Source'' settings, where user can choose the necessary satellite system(s);

* ''LED Indication'', where user can turn on or off the indication LEDs.

* ''LED Indication'', where user can turn on or off the indication LEDs;

* ''Battery Charge Mode'', where user can choose when battery will be charged: <span style=color:#F6A83E>On Need</span> (battery will be charged anytime when it needs to be charged) and <span style=color:#F6A83E>After Ignition ON</span> (battery will be charged only when ignition is on).

* ''Battery Charge Mode'', where user can choose when battery will be charged: <span style=color:#F6A83E>On Need</span> (battery will be charged anytime when it needs to be charged) and <span style=color:#F6A83E>After Ignition ON</span> (battery will be charged only when ignition is on);

* ''Analog Input Value Range'', where user can choose analog input range of 10 V or 30 V.

* ''Analog Input Value Range'', where user can choose analog input range of 10 V or 30 V;

* ''Time Synchronization'' settings, where user can choose which source(s) to use for {{{model|FMB1YX}}} time synchronization. User has a choice to: use only one synchronization source (<span style=color:#F6A83E>Disable (GPS only)</span>), allow synchronization from both the GNSS and NTP server (<span style=color:#F6A83E>NTP</span>), select synchronization through GNSS and GSM operator (<span style=color:#F6A83E>NITZ</span>) or from all three sources (when <span style=color:#F6A83E>NITZ+NTP</span> is selected). User can select which NTP server (it is possible to configure up to two servers) and what time period to use to resynchronize time.

* ''Time Synchronization'' settings, where user can choose which source(s) to use for {{{model|FMB1YX}}} time synchronization. User has a choice to: use only one synchronization source (<span style=color:#F6A83E>Disable (GPS only)</span>), allow synchronization from both the GNSS and NTP server (<span style=color:#F6A83E>NTP</span>), select synchronization through GNSS and GSM operator (<span style=color:#F6A83E>NITZ</span>) or from all three sources (when <span style=color:#F6A83E>NITZ+NTP</span> is selected). User can select which NTP server (it is possible to configure up to two servers) and what time period to use to resynchronize time.