Changes

Line 20: Line 20:  
[[Image:Fmb640_crash.png|300px|right]]
 
[[Image:Fmb640_crash.png|300px|right]]
   −
If ''Crash Detection'' is enabled, it monitors acceleration on each axis which helps detecting an accident. ''Threshold'' and ''Duration'' values are set depending on the impact that is required to be detected. {{{model|FMB640}}} can detect events ranging between a slight tapping on the device (Threshold = 100 mG, Duration = 1 ms) and a severe accident (Threshold = 4000 mG, Duration = 5 ms).
+
Scenario is activated when Crash is detected by device using acceleration values.
 +
Crash Detection functionality can be set according to these settings:
 +
1. Threshold (mg)
 +
2. Duration (ms)
 +
If accident happens and FMB640 detects acceleration value higher than set threshold value during set time period, then device will generate an event. Threshold and duration values are set depending of accident power which you want to detect. FMB640 can detect a slight tapping on the device (Threshold=100mg, Duration=1ms) or can detect severe accident (Threshold=4000mg, Duration=5ms).  
    
<br/><br/><br/><br/>
 
<br/><br/><br/><br/>