720
edits
Changes
mLine 41:
Line 41: − + Line 49:
Line 49: − + − + Line 61:
Line 61: − + Line 70:
Line 70: − + − + Line 77:
Line 77: − FM3612 sends SMS event message when a configured I/O property enters and/or exits its+
→Configuration
To configure SMS events for scenarios, open Scenarios window and Enable desired scenario.
To configure SMS events for scenarios, open Scenarios window and Enable desired scenario.
Then go to GSM ->SMS -> SMS events window and activate SMS event for Enabled scenario.
Then go to GSM ->SMS -> SMS events window and activate SMS event for Enabled scenario.
Figure 38 shows how to enable Green Driving and Immobilizer SMS Events.
Figure below shows how to enable Green Driving and Immobilizer SMS Events.
[[File:FM36YX_SMS_event_Scenarios.png]]
[[File:FM36YX_SMS_event_Scenarios.png]]
'''TRIP'''
'''TRIP'''
In order to configure Trip SMS events click on Trip window and Enable Trip feature (figure 40).
In order to configure Trip SMS events click on Trip window and Enable Trip feature (figure below).
Then go to GSM -> SMS -> SMS Events settings and Enable Trip SMS event. After enabling SMS
Then go to GSM -> SMS -> SMS Events settings and Enable Trip SMS event. After enabling SMS
Events (figure 41), trip event will be triggered and message sent, when Trip starts (GNSS speed
Events (figure below), trip event will be triggered and message sent, when Trip starts (GNSS speed
exceeds the speed in Start Speed (ex. 5 km/h) and when Trip stops, that is ignition is turned off
exceeds the speed in Start Speed (ex. 5 km/h) and when Trip stops, that is ignition is turned off
longer then the time written in Ignition Off Timeout (ex. 60 seconds).
longer then the time written in Ignition Off Timeout (ex. 60 seconds).
Geofence SMS event is triggered and message sent when the device exits and/or enters a
Geofence SMS event is triggered and message sent when the device exits and/or enters a
configured Geofence zone. The Geofence zone must be configured to generate an event On Exit,
configured Geofence zone. The Geofence zone must be configured to generate an event On Exit,
On Enter or On Both (figure 42). If No Event is selected, then it is not possible to turn on SMS
On Enter or On Both (figure below). If No Event is selected, then it is not possible to turn on SMS
events. If several zones are created then SMS events can be turned on separately for each zone
events. If several zones are created then SMS events can be turned on separately for each zone
entering different text message.
entering different text message.
SMS events for AutoGeofence are configured the same as in Geofence. AutoGeofence is in
SMS events for AutoGeofence are configured the same as in Geofence. AutoGeofence is in
Features -> Auto geofencing (figure 44), for SMS events configuration, go to GSM -> SMS -> SMS
Features -> Auto geofencing, for SMS events configuration, go to GSM -> SMS -> SMS
Events (figure 45).
Events (figure below).
[[File:FM36YX_SMS_event_AutoGeofence.png]]
[[File:FM36YX_SMS_event_AutoGeofence.png]]
'''I/O events'''
'''I/O events'''
{{{module|FM36YX}}} sends SMS event message when a configured I/O property enters and/or exits its
configured High/Low boundaries or Hysteresis event generation is chosen (Monitoring does not
configured High/Low boundaries or Hysteresis event generation is chosen (Monitoring does not
generate event, so SMS event could not be configured). Every IO element SMS event can be
generate event, so SMS event could not be configured). Every IO element SMS event can be