Changes

Created page with "centre <b>{{{model|FMB640}}} GNSS/GSM/Bluetooth terminal with {{{antenna|GNSS/GSM antennas}}} and Ni-MH battery</b> {{{pic|Image:Fmb640...."
[[Image:Qsg_rut950_teltonika.PNG|centre]]


<b>{{{model|FMB640}}} GNSS/GSM/Bluetooth terminal with {{{antenna|GNSS/GSM antennas}}} and Ni-MH battery</b>
{{{pic|[[Image:Fmb640.png|400px|right]]}}}


__TOC__


=='''How to insert {{{sim_type|Micro-}}}SIM card'''==

# Unscrew the '''screws'''.
# Gently remove {{{model|FMB1YX}}} '''cover''' using '''plastic pry tool''' from both sides.
# Insert '''{{{sim_type|Micro-}}}SIM''' card as shown with '''PIN request disabled''' or read {{{sim_pin|[[FMB640 Security info|'''Security info''']]}}} how to enter it later in Configurator. Make sure that {{{sim_type|Micro-}}}SIM card '''cut-off corner''' is not pointing forward to slot. {{{dual_sim|SIM slot 1 is closer to PCB, SIM slot 2 is the upper one.}}}
# Attach device '''cover''' and put the '''screws''' back in.
# Device is ready to be connected.

[[Image:1-1_fmb640_SIM.png|330px]][[Image:1_fmb640_SIM.png|330px]][[Image:2_fmb640_SIM.png|330px]]
[[Image:3_fmb640_SIM.png|330px]][[Image:4_fmb640_SIM.png|330px]][[Image:FMB640 sim insert-6.png|330px]]


{|
|-
| [[File:Alert.png|left|link=]] || <b>{{{sim_type|Micro-}}}SIM card insertion/removal must be performed when device is powered off – external voltage {{{battery|and internal battery}}} disconnected. Otherwise {{{sim_type|Micro-}}}SIM card might be damaged or device will not detect it.</b>
|}

=='''How to insert microSD card'''==

# Push microSD card lock case.
# Open microSD card locker.
# Correctly insert microSD card into slot.
# Close microSD card locker.
# Push microSD card lock case to locked position.

[[Image:Sd_card_1.png|x150px]] [[Image:Sd_card_2.png|x150px]] [[Image:Sd_card_3.png|x150px]] [[Image:Sd_card_4.png|x150px]] [[Image:Sd_card_5.png|x150px]]