6,023
edits
Changes
Template:FMB Accelerometer Features settings (view source)
Revision as of 09:52, 26 October 2018
, 09:52, 26 October 2018→Crash Detection
If ''Crash Detection'' is enabled, it monitors acceleration on each axis which helps detecting an accident. ''Threshold'' and ''Duration'' values are set depending on the impact that is required to be detected. {{{model|FMB1YX}}} can detect events ranging between a slight tapping on the device (Threshold = 100 mG, Duration = 1 ms) and a severe accident (Threshold = 4000 mG, Duration = 5 ms).<br/>If ''Crash Trace'' is disabled a crash detection event will be generated (included into the sent record) only when scenario starts and finishes.<br/>
If ''Crash Detection'' is enabled, it monitors acceleration on each axis which helps detecting an accident. ''Threshold'' and ''Duration'' values are set depending on the impact that is required to be detected. {{{model|FMB1YX}}} can detect events ranging between a slight tapping on the device (Threshold = 100 mG, Duration = 1 ms) and a severe accident (Threshold = 4000 mG, Duration = 5 ms).<br/>If ''Crash Trace'' is disabled a crash detection event will be generated (included into the sent record) only when scenario starts and finishes.<br/>
If ''Crash Trace'' is enabled, FMB(FMT) will collect acceleration data every 10 miliseconds and IO data every second. Buffer is big enough to hold data for 5 seconds before crash event and 5 seconds after. On Crash Event detection, records will be generated from this buffer, following these conditions:<br/>
If ''Crash Trace'' is enabled, FMB(FMT) will collect acceleration data every 10 miliseconds and IO data every second. Buffer is big enough to hold data for 5 seconds before crash event and 5 seconds after. On Crash Event detection, records will be generated from this buffer, following these conditions: <br/>
Trace Changes:
Trace Changes
* Every second
* Every second
* Acceleration changed more then >50mG
* Acceleration changed more then >50mG <br/>
Trace Full
* Every 10 ms <br/>
Trace Full with IO's
* Every second with IOs included
* Every 10 ms <br/>
If ''Crash Trace'' is enabled {{{model|FMB1YX}}} will collect acceleration data every 40 miliseconds. Buffer is big enough to hold data for 5 seconds and in the event of Crash records will be generated from this buffer, following from these conditions:
If ''Crash Trace'' is enabled {{{model|FMB1YX}}} will collect acceleration data every 40 miliseconds. Buffer is big enough to hold data for 5 seconds and in the event of Crash records will be generated from this buffer, following from these conditions: