Changes

Line 94: Line 94:     
If ''Crash Detection'' is enabled, it monitors acceleration on each axis which helps to detect an accident. ''Threshold'' and ''Duration'' values are set depending on the impact that is required to be detected. {{{model|FMB1YX}}} can detect events ranging between a slight tapping on the device and a severe accident.<br/>
 
If ''Crash Detection'' is enabled, it monitors acceleration on each axis which helps to detect an accident. ''Threshold'' and ''Duration'' values are set depending on the impact that is required to be detected. {{{model|FMB1YX}}} can detect events ranging between a slight tapping on the device and a severe accident.<br/>
If ''Crash Trace'' is disabled only one eventual crash record will be generated when ''Duration (ms)'' and ''Threshold (mg)'' values is exceeded. <br/>
+
If ''Crash Trace'' is disabled only one eventual crash record will be generated when ''Duration (ms)'' and ''Threshold (mg)'' values are exceeded. <br/>
    
If ''Crash Trace'' is enabled, {{{model|FMB1YX}}} will collect crash trace data with frequency defined by ''Trace ODR (Hz)'' parameter. Acceleration, GNSS and IO data monitoring duration during the crash event is defined by these parameters: <br/>
 
If ''Crash Trace'' is enabled, {{{model|FMB1YX}}} will collect crash trace data with frequency defined by ''Trace ODR (Hz)'' parameter. Acceleration, GNSS and IO data monitoring duration during the crash event is defined by these parameters: <br/>