Changes

Template:FMM640 RS-232 and RS-485 (view source)

Revision as of 07:32, 26 August 2019

No change in size , 07:32, 26 August 2019

no edit summary

Line 4: Line 4:

===RS-485 modes===

−

* RS-485 receive (~~FMB~~ silent) mode:

+

* RS-485 receive (FMM silent) mode:

RS485 Works in receive mode. Support debug and testing commands. When command is received answer is sent after that it back up to Receive mode.

−

* RS-485 transmit (~~FMB~~ log) mode:

+

* RS-485 transmit (FMM log) mode:

−

RS-485 prints ~~FMB~~ device log and does not respond to commands.

+

RS-485 prints FMM device log and does not respond to commands.

* RS-485 transmit (NMEA) mode:

Line 23: Line 23:

==RS-232 Interface==

−

RS-232 supports full-duplex communication which means the data can be both sent and received at the same time as they use separate transmission lines. Most of the modes are the same as for {{{model|~~FMB640~~}}}.

+

RS-232 supports full-duplex communication which means the data can be both sent and received at the same time as they use separate transmission lines. Most of the modes are the same as for {{{model|FMM640}}}.

−

{{{model|~~FMB640~~}}} RS-232 connection diagram is shown on the figure below.

+

{{{model|FMM640}}} RS-232 connection diagram is shown on the figure below.

RS232 connection diagram:

Line 31: Line 31:

===RS-232 modes===

−

Silent, Log mode, NMEA, LLS, TCP ASCII and TCP Binary modes, TCP ASCII/Binary Buffered modes are identical to those of ~~FMBXXX~~ RS-232 and RS-485 modes. In RS-232 LLS mode only one LLS fuel level sensor can be connected.

+

Silent, Log mode, NMEA, LLS, TCP ASCII and TCP Binary modes, TCP ASCII/Binary Buffered modes are identical to those of FMMXXX RS-232 and RS-485 modes. In RS-232 LLS mode only one LLS fuel level sensor can be connected.

* RS-232 LCD mode:

−

In this mode user is able to communicate with the server through terminal. A link between ~~FMB~~ device and the server has to be established for this mode to function properly.

+

In this mode user is able to communicate with the server through terminal. A link between FMM device and the server has to be established for this mode to function properly.

* RS-232 RFID HID/RFID MF7 mode:

−

Radio-frequency identification (RFID) is the use of a wireless non-contact system that uses radio-frequency electromagnetic fields to transfer data from a tag attached to an object, for the purposes of automatic identification and tracking. ~~FMB640~~ can be configured in a way to use with an RFID reader. When an RFID of some sorts (typically a plastic card with a magnetic line) is used with an RFID reader which is connected to ~~FMB640~~, the device creates a record with the data that the RFID reader has read and can be sent to a server with all other information. RFID ID is activated like an I/O parameter

+

Radio-frequency identification (RFID) is the use of a wireless non-contact system that uses radio-frequency electromagnetic fields to transfer data from a tag attached to an object, for the purposes of automatic identification and tracking. FMM640 can be configured in a way to use with an RFID reader. When an RFID of some sorts (typically a plastic card with a magnetic line) is used with an RFID reader which is connected to FMM640, the device creates a record with the data that the RFID reader has read and can be sent to a server with all other information. RFID ID is activated like an I/O parameter

[[image:FMB640_RS232_RFID.png]]

−

To set up ~~FMB640~~ so it can be connected to an RFID reader, some parameters have to be set up. Go to RS232 \ RS485 and set up COM1 or COM2 settings to RFID Mode or RFID MF7 Mode (the used mode depends on the mode that the RFID reader works). See Figure 922. The Baudrates foreach mode are:

+

To set up FMM640 so it can be connected to an RFID reader, some parameters have to be set up. Go to RS232 \ RS485 and set up COM1 or COM2 settings to RFID Mode or RFID MF7 Mode (the used mode depends on the mode that the RFID reader works). See Figure 922. The Baudrates foreach mode are:

RFID Mode – 57600

RFID MF7 Mode – 9600

Line 48: Line 48:

[[image:FMB640_RS232_RFIDconf.png]]

−

The difference between ''RFID HID Mode'' and ''RFID MF7 Mode'' is that in ''RFID HID Mode'' {{{model|~~FMB640~~}}} understands RFID messages that are in hexadecimal format and ''RFID MF7 Mode'' interpretes messages that are in decimal format. The type of RFID message sent to {{{model|~~FMB640~~}}} depends on the RFID reader. For example, ''RFID HID'' mode message looks like "$aa$02$03$04$17$89$00$01" while ''MF7 mode'' message is of following format: "1213141519". The selected mode has to correspond to the RFID reader's mode. Please contact your local sales representative for more information about RFID IDs and devices.

+

The difference between ''RFID HID Mode'' and ''RFID MF7 Mode'' is that in ''RFID HID Mode'' {{{model|FMM640}}} understands RFID messages that are in hexadecimal format and ''RFID MF7 Mode'' interpretes messages that are in decimal format. The type of RFID message sent to {{{model|FMM640}}} depends on the RFID reader. For example, ''RFID HID'' mode message looks like "$aa$02$03$04$17$89$00$01" while ''MF7 mode'' message is of following format: "1213141519". The selected mode has to correspond to the RFID reader's mode. Please contact your local sales representative for more information about RFID IDs and devices.

* REC to LCD mode: In this mode records are sent via ports.

Line 65: Line 65:

* RS-232 Garmin mode:

−

Garmin provides a Fleet Management Interface Tool Kit, once {{{model|~~FMB640~~}}} is connected to the navigator it enables the driver to have a "screen" in their vehicle for real-time navigation and messaging, and offers job dispatch capabilities to help them be more efficient. {{{model|~~FMB640~~}}} and Garmin operational diagram is shown on the figure below.

+

Garmin provides a Fleet Management Interface Tool Kit, once {{{model|FMM640}}} is connected to the navigator it enables the driver to have a "screen" in their vehicle for real-time navigation and messaging, and offers job dispatch capabilities to help them be more efficient. {{{model|FMM640}}} and Garmin operational diagram is shown on the figure below.

{{{image|[[Image:FMB640_garmin_block.png|800px|center]]}}}

Line 75: Line 75:

LLS sensor series liquid level sensors are solid-state capacitive devices with no moving parts. The sensors use capacitive technology to produce accurate liquid level measurements of standard factory grade DIESEL OIL and PURE GASOLINE (BENZINE) carbon fuels. The LLS sensor liquid level sensors are strictly prohibited to use in any liquids which are not the factory grade carbon fuels or contain: BIOFUEL, METHANOL, ETHANOL, UREA and similar aggressive components in pure form or as additives for factory grade carbon fuels for use in INTERNAL COMBUSTION ENGINES. Operating media – Diesel fuel (oil), pure gasoline (benzene).

In order to use LLS fuel counter the newest firmware version is needed which can be obtained from Teltonika or a representative. Firmware is updated over GPRS or using cable update method.

−

The LLS fuel sensor must be connected to the ~~FMB640~~ device.

+

The LLS fuel sensor must be connected to the FMM640 device.

===Specifications===

Line 106: Line 106:

[[image:FMB640_RS232_LLS.png]]

−

Then ~~FMB640~~ must be configured. Both fuel level and fuel temperature has to be set up by

+

Then FMM640 must be configured. Both fuel level and fuel temperature has to be set up by

configurator’s I/O menu:

[[image:FMB640_RS232_LLSmenu.png]]

==Garmin protocols==

−

The following is a list of protocols supported and the corresponding list of features/benefits. {{{model|~~FMB640~~}}} can fully support Fleet Management Interface (FMI) versions up to 2.1. Other or higher versions may be supported, but Teltonika is not responsible for the changes made by Garmin, which may affect the function of {{{model|~~FMB640~~}}} and Garmin products. For more information about Garmin products and FMI versions, please refer to http://www8.garmin.com/solutions/pnd/supportedproducts.jsp. Notice that some Garmin products use different connection cables than others.

+

The following is a list of protocols supported and the corresponding list of features/benefits. {{{model|FMM640}}} can fully support Fleet Management Interface (FMI) versions up to 2.1. Other or higher versions may be supported, but Teltonika is not responsible for the changes made by Garmin, which may affect the function of {{{model|FMM640}}} and Garmin products. For more information about Garmin products and FMI versions, please refer to http://www8.garmin.com/solutions/pnd/supportedproducts.jsp. Notice that some Garmin products use different connection cables than others.

===Standard protocols===

Irmantas.Tydikas

Administrators

174

edits