Line 3: |
Line 3: |
| [[Image:_Eco_Green_Driving.png|{{{eco_green|size}}}|right]] | | [[Image:_Eco_Green_Driving.png|{{{eco_green|size}}}|right]] |
| | | |
− | When vehicle parameters exceed the values of ''Max Acceleration'', ''Max Braking'' or ''Max Cornering'' parameters, the scenario is activated: a record is generated and digital output status is changed to 1 when configured. You can configure all three parameters in m/s<sup>2</sup> units. Scenario is activated until current Acceleration, Braking or Cornering value decreases below the set parameter value.<br/>Parameters used with ''Eco/Green Driving'' functionality are given in a table below. | + | When vehicle parameters exceed the values of ''Max Acceleration'', ''Max Braking'' or ''Max Cornering'' parameters, the scenario is activated: a record is generated and digital output status is changed to 1 when configured. You can configure all three parameters in m/s<sup>2</sup> units. Scenario is activated until current Acceleration, Braking or Cornering value decreases below the set parameter value.<br />Parameters used with ''Eco/Green Driving'' functionality are given in a table below. |
| | | |
| <table class="nd-othertables" style="width: 68%;"> | | <table class="nd-othertables" style="width: 68%;"> |
Line 31: |
Line 31: |
| </tr> | | </tr> |
| </table> | | </table> |
− | <br/><br/> | + | <br /><br /> |
| {{{FMT100_eco|}}} | | {{{FMT100_eco|}}} |
| | | |
− | <br/><br/><br/><br/><br/><br/>
| + | |
| + | |
| + | |
| ===Data output=== | | ===Data output=== |
| ---- | | ---- |
Line 42: |
Line 44: |
| ---- | | ---- |
| The auto-calibration process is following: | | The auto-calibration process is following: |
− | # The vehicle is stopped. | + | |
− | # There is a straight road ahead. | + | #The vehicle is stopped. |
− | # Send SMS ''"auto_calibrate:set"'' to the {{{model_2|FMB}}} device. | + | #There is a straight road ahead. |
− | # Accelerate to >30 km/h for 5 sec. | + | #Send SMS ''"auto_calibrate:set"'' to the {{{model_2|FMB}}} device. |
− | # {{{model_2|FMB}}} will send a response when calibration is completed successfully. | + | #Accelerate to >30 km/h for 5 sec. |
| + | #{{{model_2|FMB}}} will send a response when calibration is completed successfully. |
| + | |
| Calibration is saved to internal flash memory, which means it will stay after a reset. | | Calibration is saved to internal flash memory, which means it will stay after a reset. |
| To check auto-calibration status send a following short text message to the {{{model_2|FMB}}} device: ''"auto_calibrate:get"''. | | To check auto-calibration status send a following short text message to the {{{model_2|FMB}}} device: ''"auto_calibrate:get"''. |
Line 54: |
Line 58: |
| [[Image:{{{model|FMB1YX}}}_Over_Speeding.png|{{{over_speed|size}}}|right]] | | [[Image:{{{model|FMB1YX}}}_Over_Speeding.png|{{{over_speed|size}}}|right]] |
| | | |
− | When vehicle speed exceeds configured maximum speed value the scenario is activated, an event record is generated{{{text_dout| and digital output status is changed to 1 when configured}}}.<br/>Scenario is active until detected speed decreases below the set parameter value.<br/>{{{over_speeding_dout|info}}} | + | When vehicle speed exceeds configured maximum speed value the scenario is activated, an event record is generated{{{text_dout| and digital output status is changed to 1 when configured}}}.<br />Scenario is active until detected speed decreases below the set parameter value.<br />{{{over_speeding_dout|info}}} |
− | <br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/> | + | <br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /> |
| | | |
| ==Jamming== | | ==Jamming== |
Line 61: |
Line 65: |
| [[Image:{{{model|FMB1YX}}}_Jamming.png|frameless|{{{jamming|size}}}|right]] | | [[Image:{{{model|FMB1YX}}}_Jamming.png|frameless|{{{jamming|size}}}|right]] |
| | | |
− | When GSM signal jamming is detected the scenario is activated, an event record is generated{{{text_dout| and digital output status is changed to 1 when configured}}} once ''Jamming'' timeout runs out. If jamming ends during timeout countdown no event will be generated{{{text_dout| and output will not be controlled}}}.<br/>''Eventual Records'' parameter can be configured: when it is disabled scenario status value will appear in each AVL record, otherwise it will be appended only to eventual records.<br/>{{{jamming_dout|info}}} | + | When GSM signal jamming is detected the scenario is activated, an event record is generated{{{text_dout| and digital output status is changed to 1 when configured}}} once ''Jamming'' timeout runs out. If jamming ends during timeout countdown no event will be generated{{{text_dout| and output will not be controlled}}}.<br />''Eventual Records'' parameter can be configured: when it is disabled scenario status value will appear in each AVL record, otherwise it will be appended only to eventual records.<br />{{{jamming_dout|info}}} |
− | <br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/> | + | <br /><br /><br /><br /><br /><br /><br /><br /><br /><br /><br /> |
| | | |
| {{{template_link|}}} | | {{{template_link|}}} |
Line 77: |
Line 81: |
| {{{dout_control_dout|info}}}}}} | | {{{dout_control_dout|info}}}}}} |
| | | |
− | <br/> | + | <br /> |
| | | |
| {{{immobilizer_feature|==Immobilizer== | | {{{immobilizer_feature|==Immobilizer== |
Line 99: |
Line 103: |
| [[Image:{{{model|FMB1YX}}}_GNSS_Fuel_Counter.png|{{{gnss_fuel_counter|size}}}|right]] | | [[Image:{{{model|FMB1YX}}}_GNSS_Fuel_Counter.png|{{{gnss_fuel_counter|size}}}|right]] |
| | | |
− | # To configure ''Fuel Counter'' parameters use fuel consumption norms which are presented in technical documentation of the vehicle. By default speeds for these fuel consumption norms are: City – 30 km/h, Average - 60 km/h, Highway - 90 km/h. These values can be changed. | + | #To configure ''Fuel Counter'' parameters use fuel consumption norms which are presented in technical documentation of the vehicle. By default speeds for these fuel consumption norms are: City – 30 km/h, Average - 60 km/h, Highway - 90 km/h. These values can be changed. |
− | # When speed is higher than the highway fuel consumption speed, x% of highway fuel consumption is added every extra y km/h, by default {{{model|FMB1YX}}} adds 20% every 50 km/h of extra speed. For example, the fuel consumption is (1.2 * (Highway Fuel Consumption)) at 140 km/h and (1.4 * (Highway Fuel Consumption)) at 190 km/h. | + | #When speed is higher than the highway fuel consumption speed, x% of highway fuel consumption is added every extra y km/h, by default {{{model|FMB1YX}}} adds 20% every 50 km/h of extra speed. For example, the fuel consumption is (1.2 * (Highway Fuel Consumption)) at 140 km/h and (1.4 * (Highway Fuel Consumption)) at 190 km/h. |
− | # ''Correction coefficient'' is used to correct every value of fuel consumption which is sent to the server through an expression of ((Used Fuel) * ''Correction coefficient''). By default it is 1, with minimum and maximum values of accordingly 0.01 and 2. For example, when correction coefficient is 1 and {{{model|FMB1YX}}} calculates that the amount of used fuel over 35 m distance is 20 ml, the value of 20 ml will be sent to the server, and if correction coefficient is 1.2, the value of 20 * 1.2 = 24 ml will be sent to the server. | + | #''Correction coefficient'' is used to correct every value of fuel consumption which is sent to the server through an expression of ((Used Fuel) * ''Correction coefficient''). By default it is 1, with minimum and maximum values of accordingly 0.01 and 2. For example, when correction coefficient is 1 and {{{model|FMB1YX}}} calculates that the amount of used fuel over 35 m distance is 20 ml, the value of 20 ml will be sent to the server, and if correction coefficient is 1.2, the value of 20 * 1.2 = 24 ml will be sent to the server. |
− | # ''Fuel Consumption on Idling'' is used to calculate fuel consumption when ignition is on, but the vehicle is stationary. The consumption value is 1 l/h by default, with minimum and maximum of accordingly 0 and 5 l/h. This parameter is less than 1.0 l/h for almost all diesel cars and is equal to about 1.5 – 2.0 l/h for gasoline cars. | + | #''Fuel Consumption on Idling'' is used to calculate fuel consumption when ignition is on, but the vehicle is stationary. The consumption value is 1 l/h by default, with minimum and maximum of accordingly 0 and 5 l/h. This parameter is less than 1.0 l/h for almost all diesel cars and is equal to about 1.5 – 2.0 l/h for gasoline cars. |
| | | |
| {{{dout_control_via_ignition_feature|==DOUT Control Via Ignition== | | {{{dout_control_via_ignition_feature|==DOUT Control Via Ignition== |