1,583
edits
Changes
Template:FMB Accelerometer Features settings (view source)
Revision as of 08:32, 7 January 2020
, 08:32, 7 January 2020→Accelerometer Calibration
3. Z is down.<br>
3. Z is down.<br>
[[File:Vehicle axis.PNG|center|Vehicle Axis]]
[[File:Vehicle_axis.PNG|center|Vehicle Axis]]
Once vehicle‘s axes are calculated, device is considered calibrated.<br>
Once vehicle‘s axes are calculated, device is considered calibrated.<br>
Note: turning device around calibrated Z axis will not trigger re-calibration, after turning device around Z axis manual re-calibration is advised.
Note: turning device around calibrated Z axis will not trigger re-calibration, after turning device around Z axis manual re-calibration is advised.
After calibration if quality value is less than 0.80, calibration update functionality is run. Calibration update constantly tries calibrating device in background until 0.80 quality is reached. Calibration update functionality does not change calibration if calculated new calibration quality is less than 0.80.
After calibration if quality value is less than 0.80, calibration update functionality is run. Calibration update constantly tries calibrating device in background until 0.80 quality is reached. Calibration update functionality does not change calibration if calculated new calibration quality is less than 0.80.
==Excessive Idling==
==Excessive Idling==