Changes

no edit summary
Line 10: Line 10:     
*'''''TZ-BT04/05/05B Update frequency''''' – changes sensor's temperature/humidity/battery voltage data update frequency. <br /> Minimum value: 120 s, maximum value: 65535 s, default value: 120.
 
*'''''TZ-BT04/05/05B Update frequency''''' – changes sensor's temperature/humidity/battery voltage data update frequency. <br /> Minimum value: 120 s, maximum value: 65535 s, default value: 120.
*'''''Working mode''''' – Bluetooth connection mode. '''Disabled''': Bluetooth 4.0 connection will not be used. '''TZ-BT04/05/05B sensor''': this Bluetooth connection will be used to communicate with TZ-BT04/05/05B sensor. '''''Advanced''' -'' It allows to gather data from BLE device‘s broadcast packets regardless of what data packing protocol is used''.'' <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br> <br>When Advanced mode is selected a table with configurable parameters will appear:
+
*'''''Working mode''''' – Bluetooth connection mode. '''Disabled''': Bluetooth 4.0 connection will not be used. '''TZ-BT04/05/05B sensor''': this Bluetooth connection will be used to communicate with TZ-BT04/05/05B sensor. '''''Advanced''' -'' It allows to gather data from BLE device‘s broadcast packets regardless of what data packing protocol is used''.'' <br> <br>When Advanced mode is selected a table with configurable parameters will appear:
 
*
 
*
 +
 
[[Image:BLE advanced window.png|1000px|none]]<br />
 
[[Image:BLE advanced window.png|1000px|none]]<br />
 +
 
*The table has 9 types of parameters:
 
*The table has 9 types of parameters:
 
*#Type – EIR data type. This parameter will indicate which type to look for and work with. Note: We have also added type with value 0xFE which will indicate to work with a whole data packet and not just a single data type.
 
*#Type – EIR data type. This parameter will indicate which type to look for and work with. Note: We have also added type with value 0xFE which will indicate to work with a whole data packet and not just a single data type.
Line 151: Line 153:  
</table>
 
</table>
   −
== Supported Sensors List ==
+
==Supported Sensors List==
      Line 157: Line 159:     
While following the steps showed in the images below, you can find the supported sensors in our configurator.
 
While following the steps showed in the images below, you can find the supported sensors in our configurator.
[[Image:Preset1.png|1000px|none]]<br />
+
[[Image:Preset1.png|1000px|none]]
 +
 
 +
 
 +
After the '''Showed Presets Button''' was pressed, the following window should appear.
 +
 
 +
<br />