Changes

While selecting the '''Beacons Detection''' as '''All''', the device will detect all beacons which are located around the device.

While selecting the '''Beacons Detection''' as '''All''', the device will detect all beacons which are located around the device.

[[Image:Beacon Settings.PNG|300px|none]]

[[Image:All.png|300px|none]]

Select '''Beacons Detection''' as the '''Configured''', in this case, the beacons will only be detected and send if they were added to the Beacons List.

Select '''Beacons Detection''' as the '''Configured''', in this case, the beacons will only be detected and send if they were added to the Beacons List.

[[Image:Beacon Settings.PNG|300px|none]]

[[Image:Configured.png|300px|none]]

The Beacons which was found will be shown in the Configurator and send as the '''AVL ID 314''' record data.

The Beacons which was found will be shown in the Configurator and send as the '''AVL ID 314''' record data.

[[Image:Beacon Settings.PNG|300px|none]]

[[Image:Beacons.png|1000px|none]]

==Beacon List==

==Beacon List==

Below there is provided the example of the List, while using the '''Beacons Detection source as Configured.''' The provided example is showing the configuration for the iBeacon and Eddy-stone.

Below there is provided the example of the List, while using the '''Beacons Detection source as Configured.''' The provided example is showing the configuration for the iBeacon and Eddy-stone.

[[Image:Configured_List.PNG|300px|none]]

[[Image:Configured List.png|1000px|none]]

<br />

<br />

[[Category:FMB120 Configuration]]

[[Category:FMB120 Configuration]]