Changes

no edit summary
Line 3: Line 3:     
<b>{{{description|Leading GNSS/GSM/Bluetooth Terminal for advanced applications}}}</b>
 
<b>{{{description|Leading GNSS/GSM/Bluetooth Terminal for advanced applications}}}</b>
{{{pic|[[Image:Fmb640.png|400px|right]]}}}
+
{{{pic|[[Image:FMB640 New Case Laser.png|400px|right]]}}}
      Line 12: Line 12:  
=='''How to insert SIM card'''==
 
=='''How to insert SIM card'''==
   −
#Gently remove {{{model|FMB1YX}}} '''cover''' using '''plastic pry tool''' from both sides.
+
1. Unscrew 4 screws counterclockwise that are located on the bottom of the device.<BR>
#Insert '''SIM''' card as shown with '''PIN request disabled''' or read {{{sim_pin|[[FMB640 Security info|'''Security info''']]}}} how to enter it later in Configurator. Make sure that SIM card '''cut-off corner''' is not pointing forward to slot. {{{dual_sim|SIM slot 1 is closer to PCB, SIM slot 2 is the upper one.}}}
+
2. Remove the cover.<BR>
#Attach device '''cover''' and put the '''screws''' from the package into the holes.
+
3. Insert SIM card as shown with PIN request disabled or read Security info how to enter it later in Teltonika Configurator. Make sure that SIM card cut-off corner is pointing forward to slot. SIM slot 1 is closer to PCB, SIM slot 2 is the upper one.<BR>
#'''Screw''' all 4 screws.
+
4. Connect battery as shown to device.<BR>
#Device is ready to be connected.
+
5. After configuration, see “PC Connection (Windows)”, attach device cover back.<BR>
 +
6. Screw in all screws. Device is ready to be mounted.<BR>
   −
[[Image:1_fmb640_SIM.png|330px]][[Image:2_fmb640_SIM.png|330px]]
+
[[Image:SIM instructions FMM64FMC64.PNG|660px]]
[[Image:3_fmb640_SIM.png|330px]][[Image:4_fmb640_SIM.png|330px]][[Image:FMB640 sim insert-6.png|330px]]