Changes

Template:FMB CAN line connection (view source)

Revision as of 08:55, 4 June 2020

768 bytes added , 08:55, 4 June 2020

m

no edit summary

Line 7: Line 7:

==Installing {{{model|FMB1YX}}} device==

====Tools needed for installation====

−

* Connection scheme ~~(Please~~ contact Teltonika Sales Representative and provide information about '''vehicle manufacturer''', '''model''' and '''year'''.

+

* Connection scheme by CAN adapter:

+

** [https://wiki.teltonika-gps.com/wikibase/images/d/d8/LVCAN200_list_2020_03_03Teltonika.pdf LV-CAN200]

+

** [https://wiki.teltonika-gps.com/wikibase/images/5/5e/ALL-CAN300_list_2020_03_03Teltonika.pdf ALL-CAN300]

+

:'''Note:''' if on the ''"Supported vehicle list"'' you do not find your vehicle, please contact Teltonika Sales Representative and provide information about '''vehicle manufacturer''', '''model''' and '''year'''.

* {{{model|FMB1YX}}} device

* Pliers

Line 16: Line 19:

====Installation steps====

# Be ready with a vehicle '''connection scheme''' that you have received from a Teltonika Sales Representative.

−

# '''Check the scheme''' for the current vehicle connection. Look for connectors matching '''PINs numbers''' and colors (~~may~~ be different) according to connection scheme.

+

# '''Check the scheme''' for the current vehicle connection. Look for connectors matching '''PINs numbers''' and colors (can be different) according to connection scheme.

# Connect {{{model|FMB1YX}}} '''CAN wires (CAN L, CAN H)''' as specified in connection scheme.<table><td>[[File:Alert.png|50px|left|link=]]</td><td>Do not swap CAN L and CAN H lines. Not all {{{model|FMB1YX}}} wires may be used in vehicle.</td></table>

# Connect {{{model|FMB1YX}}} '''positive''' and '''ground''' wires to the vehicle power supply lines.<table><td>[[File:Alert.png|50px|left|link=]]</td><td>Do not swap power supply lines. Make sure that voltage does not exceed 30V.</td></table>

Line 26: Line 29:

−

===Installing {{{model|FMB1YX}}} + SIMPLE-CAN===

+

===Installing {{{model|FMB1YX}}} + SIMPLE-CAN / MINI-CAN===

----

====Tools needed for installation====

−

* Connection scheme ~~(Please~~ contact Teltonika Sales Representative and provide information about '''vehicle manufacturer''', '''model''' and '''year'''.

+

* Connection scheme by CAN adapter:

−

* [[SIMPLE-CAN]] (Used for contactless connection. If '''two CAN lines''' need to be connected, '''two SIMPLE-CAN's''' must be used.)

+

** [https://wiki.teltonika-gps.com/wikibase/images/d/d8/LVCAN200_list_2020_03_03Teltonika.pdf LV-CAN200]

+

** [https://wiki.teltonika-gps.com/wikibase/images/5/5e/ALL-CAN300_list_2020_03_03Teltonika.pdf ALL-CAN300]

+

:'''Note:''' if on the ''"Supported vehicle list"'' you do not find your vehicle, please contact Teltonika Sales Representative and provide information about '''vehicle manufacturer''', '''model''' and '''year'''.

+

* [[SIMPLE-CAN]] / [[MINI-CAN]] (Used for contactless connection. If '''two CAN lines''' need to be connected, '''two SIMPLE-CAN's / MINI-CAN's''' must be used.)

* {{{model|FMB1YX}}} device

* Pliers

Line 38: Line 44:

====Installation steps====

−

# Connect the appropriate CAN bus pair of wires between {{{model|FMB1YX}}} and [[SIMPLE-CAN]]:

+

# Connect the appropriate CAN bus pair of wires between {{{model|FMB1YX}}} and [[SIMPLE-CAN]] / [[MINI-CAN]]:

#: If '''CAN1 line''' need to be connected as specified in connection scheme:

−

## Connect {{{model|FMB1YX}}} '''CAN1 L''' to '''CAN L''' of [[SIMPLE-CAN]].

+

## Connect {{{model|FMB1YX}}} '''CAN1 L''' to '''CAN L''' of [[SIMPLE-CAN]] / [[MINI-CAN]].

−

## Connect {{{model|FMB1YX}}} '''CAN1 H''' to '''CAN H''' of [[SIMPLE-CAN]].

+

## Connect {{{model|FMB1YX}}} '''CAN1 H''' to '''CAN H''' of [[SIMPLE-CAN]] / [[MINI-CAN]].

−

#: If '''CAN2 line''' need to be connected as specified in connection scheme:

+

#: If '''CAN2 line''' need to be connected as specified in the connection scheme:

−

## Connect {{{model|FMB1YX}}} '''CAN2 L''' to '''CAN L''' of [[SIMPLE-CAN]].

+

## Connect {{{model|FMB1YX}}} '''CAN2 L''' to '''CAN L''' of [[SIMPLE-CAN]] / [[MINI-CAN]].

−

## Connect {{{model|FMB1YX}}} '''CAN2 H''' to '''CAN H''' of [[SIMPLE-CAN]].<table><td>[[File:Alert.png|50px|left|link=]]</td><td>Do not swap CAN L and CAN H lines. Not all CAN adapter wires may be used in vehicle.</td></table>

+

## Connect {{{model|FMB1YX}}} '''CAN2 H''' to '''CAN H''' of [[SIMPLE-CAN]] / [[MINI-CAN]].<table><td>[[File:Alert.png|50px|left|link=]]</td><td>Do not swap CAN L and CAN H lines. Not all CAN adapter wires may be used in vehicle.</td></table>

−

# Fasten [[SIMPLE-CAN]] '''between vehicle CAN bus wires''' according to the connection scheme. '''It doeasn't matter which wire is on which side.'''[[File:SIMPLE-CAN_connection.gif|none]]

+

# Fasten [[SIMPLE-CAN]] / [[MINI-CAN]] '''between vehicle CAN bus wires''' according to the connection scheme. '''It doeasn't matter which wire is on which side.'''[[File:SIMPLE-CAN_connection.gif|none]]

# Connect {{{model|FMB1YX}}} '''positive''' and '''ground''' wires to the vehicle power supply lines or near {{{model|FMB1YX}}} power wires.<table><td>[[File:Alert.png|50px|left|link=]]</td><td>Do not swap power supply lines. Make sure that voltage does not exceed 30V.</td></table>

# Switch vehicle '''ignition to ACC''' position.

−

# [[SIMPLE-CAN]] '''LED will shine continously''' so device awaits for '''calibration'''.<div><ul><li style="display: inline-block;">[[File:SIMPLE-CAN_calibration.gif|none|thumb|'''Press the switch shortly''' and wait for the LED to start blinking '''every one second'''. ]]</li><li style="display: inline-block;">[[File:SIMPLE-CAN after calibration.gif|none|thumb|Automatic calibration process takes up to 10 seconds depending on the vehicle model. Device is calibrated properly then the LED is blinking '''every 2 seconds'''.]]</li></ul></div><table><td>[[File:Alert.png|50px|left|link=]]</td><td>If after calibration process LED shines continuously, it means that device is not calibrated yet, CAN-BUS transmission has failed or ignition during calibration was not ON.</td></table>

+

# [[SIMPLE-CAN]] / [[MINI-CAN]] '''LED will shine continously''' so device awaits for '''calibration'''.<div><ul><li style="display: inline-block;">[[File:SIMPLE-CAN_calibration.gif|none|thumb|'''Press the switch shortly''' and wait for the LED to start blinking '''every one second'''. ]]</li><li style="display: inline-block;">[[File:SIMPLE-CAN after calibration.gif|none|thumb|Automatic calibration process takes up to 10 seconds depending on the vehicle model. Device is calibrated properly then the LED is blinking '''every 2 seconds'''.]]</li></ul></div><table><td>[[File:Alert.png|50px|left|link=]]</td><td>If after calibration process LED shines continuously, it means that device is not calibrated yet, CAN-BUS transmission has failed or ignition during calibration was not ON.</td></table>

# Configure {{{model|FMB1YX}}} to read CAN bus data by setting its '''program number''' - [[{{{FMB140|{{{model|FMB1YX}}}_CAN_adapters#CAN_Adapter_Configuration}}}|CAN Adapter configuration]]

Sandra.Gasyte

Administrators

2,556

edits