3,261
edits
Changes
How to start with FMB devices and Beacons? (view source)
Revision as of 08:48, 14 October 2020
, 08:48, 14 October 2020no edit summary
*We recommend to set <i>Power</i> to 4 to get the best possible distance.
*We recommend to set <i>Power</i> to 4 to get the best possible distance.
*Set ''TAG Format'' to iBeacon.
*Set ''TAG Format'' to iBeacon.
*Set ''BLE Emit Period'' to 1 seconds to get best possible sensor detection.
*Set ''BLE Emit Period'' to 1 second to get the best possible sensor detection.
*Click <i>Write</i> button.
*Click <i>Write</i> button.
*Place your Android-powered device on top of Blue Puck/Coin/Slim sensor to write configuration to it.
*Place your Android-powered device on top of Blue Puck/Coin/Slim sensor to write configuration to it.
===Beacon configuration===
===Beacon configuration===
Below are short instructions which show how we recommend to configure the device to Enable the Beacon functionality for testing.
Below are short instructions which show how we recommend configuring the device to Enable the Beacon functionality for testing.