Line 5: |
Line 5: |
| * Vehicle doors Lock/Unlock is working but engine Blocking/Unblocking does not and after sending commands, the response is: "''CAN-CONTROL cmd not supported''". | | * Vehicle doors Lock/Unlock is working but engine Blocking/Unblocking does not and after sending commands, the response is: "''CAN-CONTROL cmd not supported''". |
| | | |
− | If You encounter with any of these issues - we offer a perfect solution. | + | If You encounter with any of these issues - follow solution steps below. |
| | | |
| == Solution == | | == Solution == |
− | After installation is complete and CAN bus adapter program is set, please, follow these steps: | + | After installation is completed and CAN bus adapter program is set, please, follow these steps: |
| | | |
| # Do a learning procedure - using the vehicle key, unlock and lock vehicle '''three''' '''times'''; | | # Do a learning procedure - using the vehicle key, unlock and lock vehicle '''three''' '''times'''; |
Line 15: |
Line 15: |
| # After receiving a response to a command, repeat the learning procedure (first step). | | # After receiving a response to a command, repeat the learning procedure (first step). |
| | | |
− | '''Note''': Before SMS text, two space symbols should be inserted if no SMS username or password was set in [[FMB001 SMS/Call settings|SMS / Call settings]].
| |
| | | |
| + | {| |
| + | |- |
| + | | [[File:Alert.png|left|link=]] || <b>'''Note''': Before SMS text, two space symbols should be inserted if no SMS username or password was set in [[FMB001 SMS/Call settings|SMS / Call settings]]. |
| After completed these steps, commands to open/close and to block/unblock engine can be performed. | | After completed these steps, commands to open/close and to block/unblock engine can be performed. |
| + | All SMS/GPRS responses should inform You that particular command has been completed successfully.</b> |
| + | |} |
| | | |
− | All SMS/GPRS responses should inform You that particular command has been completed successfully.
| + | <bR> |
− | | + | {| |
− | '''Note''': if installing CAN-CONTROL adapter into different vehicle - program should be changed according to the vehicle model and learning must be initiated ("first solution step"). If adapter will be installed again on the previous vehicle - program number needs to be restored and learning step must be repeated. | + | |- |
| + | | [[File:Alert.png|left|link=]] || <b>'''Note''': if installing CAN-CONTROL adapter into different vehicle - program should be changed according to the vehicle model and learning must be initiated ("first solution step"). |
| + | If adapter will be installed again on the previous vehicle - program number needs to be restored and learning step must be repeated. |
| + | </b> |
| + | |} |