1,583
edits
Changes
Upgrading CAN-CONTROL to CAN-CONTROl+Immobilizer (view source)
Revision as of 09:39, 22 January 2021
, 09:39, 22 January 2021no edit summary
# After receiving a response to a command, repeat the learning procedure (first step).
# After receiving a response to a command, repeat the learning procedure (first step).
{|
|-
| [[File:Alert.png|left|link=]] || <b>'''Note''': Before SMS text, two space symbols should be inserted if no SMS username or password was set in [[FMB001 SMS/Call settings|SMS / Call settings]].
After completed these steps, commands to open/close and to block/unblock engine can be performed.
After completed these steps, commands to open/close and to block/unblock engine can be performed.
All SMS/GPRS responses should inform You that particular command has been completed successfully.</b>
|}
<bR>
{|
'''Note''': if installing CAN-CONTROL adapter into different vehicle - program should be changed according to the vehicle model and learning must be initiated ("first solution step"). If adapter will be installed again on the previous vehicle - program number needs to be restored and learning step must be repeated.
|-
| [[File:Alert.png|left|link=]] || <b>'''Note''': if installing CAN-CONTROL adapter into different vehicle - program should be changed according to the vehicle model and learning must be initiated ("first solution step").
If adapter will be installed again on the previous vehicle - program number needs to be restored and learning step must be repeated.
</b>
|}