Changes

Line 16: Line 16:  
==Installation==
 
==Installation==
   −
==='''How to insert Micro-SIM card and connect battery'''===
+
==='''How to insert Micro-SIM card and connect battery for FMB1XA'''===
    
# Gently remove {{{model|FMB1YX}}} '''cover''' using '''plastic pry tool''' from both sides.
 
# Gently remove {{{model|FMB1YX}}} '''cover''' using '''plastic pry tool''' from both sides.
Line 33: Line 33:  
|}
 
|}
    +
==='''How to insert Nano-SIM card and connect battery for FMB00X'''===
 +
 +
# Open the top cover of the device. The cover is opened by unclipping it at the recessed corner.
 +
# Insert '''Nano-SIM card'' as shown with '''PIN request disabled''' or read our Wiki how to enter it later in Teltonika Configurator. Make sure that the Nano-SIM card is fitted properly into the holder.
 +
# Connect the battery as shown in the figure.
 +
# After '''configuration''', see “PC Connection (Windows)”, attach device '''cover''' back.
 +
 +
 +
 +
The device is ready to be mounted.
 +
 +
 +
{{{insert1|[[Image:Fmb020 card 1.png|280px]]}}}{{{insert2|[[Image:Fmb020 card 2.png|280px]]}}}{{{insert3|[[Image:Fmb020 card 3.png|280px]]}}}{{{insert4|[[Image:Fmb020 card 4.png|280px]]}}}
 +
 +
 +
{|
 +
|-
 +
| [[File:Alert.png|left|link=]] || <b>{{{sim_type|Nano-}}}SIM card insertion/removal must be performed when device is powered off – external voltage and battery are disconnected. Otherwise {{{sim_type|Nano-}}}SIM card might be damaged or device will not detect it.</b>
 +
|}
    
Connecting the device to the vehicle:
 
Connecting the device to the vehicle: