239
edits
Changes
no edit summary
*FMB1YX device, which is connected to the CAN adapter (or [[FMB140]] which has an internal CAN adapter), must be registered in Fota – device‘s model, firmware version, serial number, and other information must be shown.
*FMB1YX device, which is connected to the CAN adapter (or [[FMB140]] which has an internal CAN adapter), must be registered in Fota – device‘s model, firmware version, serial number, and other information must be shown.
*FMB1YX device, which is connected to the CAN adapter, must have a correct firmware version uploaded. Currently, this feature is supported from firmware 03.25.15.Rev.143 (FMB140 Firmware version), however it is suggested to use Firmware version which is 03.25.16.Rev.410 [[FMB140_firmware_errata|FMB140]]. If you want to update your CAN Adapter, please contact your local Teltonika sales manager or Teltonika GPS technical support. Once a device with the correct firmware version connects to Fota on the next scheduled connection (or instant connection, initiated by an SMS command "web_connect"), a small, blue, „CAN“ logo will appear next to the device‘s model:
*FMB1YX device, which is connected to the CAN adapter, must have a correct firmware version uploaded. Currently, this feature is supported from firmware 03.25.15.Rev.143 (FMB140 Firmware version), however it is suggested to use Firmware version which is 03.25.16.Rev.410 [[FMB140_firmware_errata|FMB140]]. If you want to update your CAN Adapter, please contact your local Teltonika sales manager or Teltonika GPS technical support. Once a device with the correct firmware version connects to Fota on the next scheduled connection (or instant connection, initiated by an SMS command "web_connect"), a small, blue, „CAN“ logo will appear next to the device‘s model. And current version of the CAN adapter software can be checked in the table on the right.
[[Image:11I registered.jpg|1160x1160px|center]]
[[Image:11I registered.jpg|1160x1160px|center]]
<br />
<br />
*If the software is not up-to-date it can be updated in the previous window. A check-box needs to be ticked, then the „Actions“ button pressed and „Update CAN adapter firmware“ selected:
*If the software is not up-to-date it can be updated in the previous window. A check-box needs to be ticked, then the „Actions“ button pressed and „Update CAN adapter firmware“ selected:
*When the update is finished, a new software version can be seen in the details window after the next scheduled connection to Fota (or instant connection, initiated by an SMS command "web_connect"):
*When the update is finished, a new software version can be seen in the details window after the next scheduled connection to Fota (or instant connection, initiated by an SMS command "web_connect"):
[[Category: Frequently Asked Questions - FAQ]]
[[Category: Frequently Asked Questions - FAQ]]