Changes

no edit summary
Line 27: Line 27:  
Speed source will be used to determine which speed source to use.<br></br>
 
Speed source will be used to determine which speed source to use.<br></br>
 
'''Note:''' If the speed source is configured as OBD / CAN, the device will try to take speed from OBD first. If the speed value read is 0, then it tries to take speed from CAN. If the speed value is also 0, the firmware takes the speed from GNSS, even though it is not configured.}}}
 
'''Note:''' If the speed source is configured as OBD / CAN, the device will try to take speed from OBD first. If the speed value read is 0, then it tries to take speed from CAN. If the speed value is also 0, the firmware takes the speed from GNSS, even though it is not configured.}}}
 +
 
===Records Saving/Sending Without TS===
 
===Records Saving/Sending Without TS===
 
------------------
 
------------------
Line 136: Line 137:  
* '''Disabled''' – do not remove GRAVITY component from AXL/Crash data.
 
* '''Disabled''' – do not remove GRAVITY component from AXL/Crash data.
 
* '''Enabled''' – remove GRAVITY component from AXL/Crash.
 
* '''Enabled''' – remove GRAVITY component from AXL/Crash.
<br>
  −
'''Note:''' In [[{{{model|FMB1YX}}}]] devices autocalibration is set by default and it is not configurable via configurator. Device connected to OBD port is not positioned according to the vehicle axis and in this case autocalibration is a must.
  −
}}}