Line 1: |
Line 1: |
| == Description == | | == Description == |
| Cable is a '''standardized''' heavy duty vehicle '''FMS 12-pin''' connector, for connecting FMX640 with '''one plug''' and receiving '''vehicle information''' through CAN line and K-line, along with '''powering the device''' and getting '''Ignition detection'''. This ensures easier connection and does not violate the '''factory warranty.''' | | Cable is a '''standardized''' heavy duty vehicle '''FMS 12-pin''' connector, for connecting FMX640 with '''one plug''' and receiving '''vehicle information''' through CAN line and K-line, along with '''powering the device''' and getting '''Ignition detection'''. This ensures easier connection and does not violate the '''factory warranty.''' |
| + | {| class="wikitable" |
| + | |+Technical data of the cable: |
| + | |Supported devices |
| + | |FMB640/FMC640/FMM640/FM6300 |
| + | |- |
| + | |Number of pins |
| + | |12 |
| + | |- |
| + | |Pinout |
| + | |Pin12: VDC |
| + | Pin1: GND |
| + | |
| + | Pin6: CAN H |
| + | |
| + | Pin9: CAN L |
| + | |
| + | Pin10: Ignition |
| + | |
| + | Pin7: K-line |
| + | |- |
| + | |Supported protocols |
| + | |FMS/K-Line |
| + | |- |
| + | |Length |
| + | |0.9 meter |
| + | |} |
| [[File:Fms-cable-scheme.jpg|center|frameless|852x852px]] | | [[File:Fms-cable-scheme.jpg|center|frameless|852x852px]] |
| | | |
Line 8: |
Line 34: |
| We were able to identify the most common places for the FMS plug – refer to the examples bellow: | | We were able to identify the most common places for the FMS plug – refer to the examples bellow: |
| | | |
− | # Behind the Fuse panel on passenger side – for Example SCANIA S/R/G/P Euro6 Series: [[File:Scania R-series 1.3.png|frameless|1000x1000px]]
| + | ==== Behind the Fuse panel on passenger side – for Example SCANIA S/R/G/P Euro6 Series [[File:Scania R-series 1.3.png|frameless|1000x1000px]] ==== |
− | # Near the Fuse panel on passenger side – for example DAF XF Euro6: [[File:DAF XF 1.3.png|frameless|1000x1000px]]
| + | |
− | # Behind the Radio on lower deck – for example Volvo FH Euro5 and Renault T Euro6: [[File:Volvo FH 1.3.png|frameless|1000x1000px]]
| + | ==== Near the Fuse panel on passenger side – for example DAF XF Euro6 [[File:DAF XF 1.3.png|frameless|1000x1000px]] ==== |
− | # Behind the Tachograph on upper deck – for example Mercedes Actros MP5 Euro6: [[File:Mercedes Actros 1.3.png|frameless|1000x1000px]]
| + | |
| + | ==== Behind the Radio on lower deck – for example Volvo FH Euro5 and Renault T Euro6 [[File:Volvo FH 1.3.png|frameless|1000x1000px]] ==== |
| + | |
| + | ==== Behind the Tachograph on upper deck – for example Mercedes Actros MP5 Euro6 [[File:Mercedes Actros 1.3.png|frameless|1000x1000px]] ==== |
| | | |
| | | |
Line 24: |
Line 53: |
| * Volvo FH - FM - FL | | * Volvo FH - FM - FL |
| | | |
− | If the '''RDD''' signal is available on the '''FMS''' interface, no additional connection is required. In this case, the '''CANx LOW and HIGH''' wires from the FMx640 are connected to '''PIN 6 and 9''' on the '''FMS''' connector.
| + | <br> |
− | Additionally, '''PIN 10''' can be used for ignition detection using '''DIN1''' wire.
| |
− | | |
− | [[image:FMS_connector.png|central]]
| |
− | [[image:FMS_connector1.png|central]]
| |
− | | |
− | More information about FMS CABLE can be found on [https://teltonika-gps.com/product/fms-cable/ Teltonika Page] <br><br><br>
| |
| | | |
| For the following vehicles regarding the '''RDD''', please contact the manufacturer: | | For the following vehicles regarding the '''RDD''', please contact the manufacturer: |