Changes

==Installation photos==

==Installation photos==

Device should be mounted with the device name view to the open sky (metal free). FMB230 logo is shown in figure below:

Device should be mounted with the sticker view to the open sky (metal free). FMB230 area with sticker is shown in figure below:

<br />

<br />

[[File:FMB230_07.png|center|400px]]

[[File:FMB230_07.png|center|400px]]

<br />

<br />

FMB1YX can be mounted under the plastic panel behind the front window, with the sticker direction to a window (sky). It is recommended to place FMB1YX behind dashboard as close to the window as possible. A good example of GNSS antenna placement is displayed in a picture below (area colored green).

FMB230 device should be mounted with the device logo view to the open sky (metal free) with not less than ¾ of metal free area.has IP67 protection class. Top performance is reached if mounted outside of the vehicle.

The device has adhesive tape to securely place the device.

<br />

<br />

SIM card should be inserted in the module while the connector is plugged off (while module has no power).  

SIM card should be inserted in the module while the connector is plugged off (while module has no power).