1,645
edits
Changes
→DualCam update procedure
# Format the SD cards of both cameras using SMS command "camget_sdformat:<cam id>". Cam id is the same as in “camreq”: 1 - Front Camera, 2 - Rear Camera.
# Format the SD cards of both cameras using SMS command "camget_sdformat:<cam id>". Cam id is the same as in “camreq”: 1 - Front Camera, 2 - Rear Camera.
For example:
For example:
camget_sdformat:1
camget_sdformat:1
camget_sdformat:2
camget_sdformat:2
Our device will return success, if the format goes well. The result returned of a successful SD card format:
Our device will return success, if the format goes well. The result returned of a successful SD card format:
Camera front/rear SD Card format success
Camera front/rear SD Card format success
After the cards are formatted, power off everything, disconnect the camera from FMx125 and take out the SD cards. If disconnecting FMx125 from the DualCam is not possible, disable external UART mode from the configuration:
==Troubleshoot==
==Troubleshoot==