Line 14: |
Line 14: |
| # '''Unscrew''' 4 screws counterclockwise that are located on the '''bottom''' of the device. | | # '''Unscrew''' 4 screws counterclockwise that are located on the '''bottom''' of the device. |
| # Remove the '''cover'''. | | # Remove the '''cover'''. |
− | # Insert '''SIM''' card as shown with '''PIN request disabled''' or read '''[[{{{model|FMB640}}} Security info|Security info]]''' how to enter it later in [[Teltonika Configurator]]. Make sure that SIM card '''cut-off corner''' is pointing forward to slot. {{{dual_sim|'''SIM slot 1''' is closer to PCB, '''SIM slot 2''' is the upper one.}}} | + | # Insert '''SIM''' card as shown with '''PIN request disabled''' or read '''[[{{{model|FMB640}}} Security info|Security info]]''' how to enter it later in [[Teltonika Configurator]]. Make sure that SIM card '''cut-off corner''' is pointing outside. {{{dual_sim|'''SIM slot 1''' is closer to PCB, '''SIM slot 2''' is the upper one.}}} |
| {{{be_battery|# Connect '''battery''' as shown to device.}}} | | {{{be_battery|# Connect '''battery''' as shown to device.}}} |
| # After '''configuration''', see “'''[[{{{model|FMB640}}}_First_Start#PC Connection (Windows)|PC Connection (Windows)]]'''”, attach device '''cover''' back. | | # After '''configuration''', see “'''[[{{{model|FMB640}}}_First_Start#PC Connection (Windows)|PC Connection (Windows)]]'''”, attach device '''cover''' back. |
Line 24: |
Line 24: |
| [[Image:Fmb640FMB640444.png|260px]] | | [[Image:Fmb640FMB640444.png|260px]] |
| | | |
− | {|
| + | |
− | |-
| + | |
− | |[[File:Alert.png|left|link=]]||<b>{{{sim_type|Micro-}}}SIM card insertion/removal must be performed when device is powered off – external voltage {{{battery|and internal battery}}} disconnected. Otherwise {{{sim_type|Micro-}}}SIM card might be damaged or device will not detect it.</b>
| + | [[File:Alert.png|left|link=]] <br> <b>{{{sim_type|Micro-}}}SIM card insertion/removal must be performed when device is powered off – external voltage {{{battery|and internal battery}}} disconnected. Otherwise {{{sim_type|Micro-}}}SIM card might be damaged or device will not detect it.</b><br> |
− | |} | + | |
| + | [[File:SIM_3in1.png|left|230px]] <b>FMX6 devices use Standard size SIM cards for SIM1 and SIM2. Currently most of the SIM cards provided by operators can be disassembled into 3 parts - Standard/Micro/Nano. Depending on the SIM card construction - during device usage in harsh conditions, SIM assembly might come apart which causes instability when connecting to operator.<br> |
| + | To avoid such risk:<br> |
| + | 1) If possible - ask operator for Standard SIM card with solid construction (not pre-cut to 3 parts) <br> |
| + | 2) Do not use SIM cards that were previously disassembled (SIM was taken apart previously)<br> |
| + | 3) If you plan to use only one SIM card - insert it into SIM1 slot (lower slot) - this ensures greater pressure on SIM contacts as the contact bed is pushed by PCB.<br> |
| + | When 2 SIM cards are used simultaneously risk is mitigated as well - when SIM1 is inserted, a greater pressure is applied for SIM2, so SIM parts are harder to come lose </b><br> |
| + | <br> |
| + | <br> |
| + | <br> |
| | | |
| =='''How to insert microSD card into {{{model|FMB640}}}'''== | | =='''How to insert microSD card into {{{model|FMB640}}}'''== |