0
edits
Changes
mLine 23:
Line 23: + + + + + + + + + + + + + + + + + +
→LV-CAN200 and ALL-CAN300 program number selection
|}
|}
==LV-CAN200 and ALL-CAN300 program number selection==
==LV-CAN200 and ALL-CAN300 program number selection==
LV-CAN200 or ALL-CAN300 must be set to program number which depends on vehicle model. '''Needed program number is always written on LV-CAN200 or ALL-CAN300 mounting scheme.''' Please contact Your Teltonika sales manager to get latest supported vehicle list and mounting scheme for your vehicle, please provide CAR manufacturer, model and year information.
===LV-CAN200 and ALL-CAN300 program number configuration via SMS command===
===LV-CAN200 and ALL-CAN300 program number configuration via SMS command===
LV-CAN200 and ALL-CAN300 program number can be set remotely, using SMS command (more lvcan commands in chapter SMS command list):<br/>lvcansetprog X<br/>X is new program number value.
===LV-CAN200 and ALL-CAN300 program number configuration via configurator===
===LV-CAN200 and ALL-CAN300 program number configuration via configurator===
LV-CAN200 and ALL-CAN300 program number can be set via configurator: LVCAN -> Program Number. When program number is entered press ‘Save to device’ button that entered program number saves into FMB120.
===Selecting LV-CAN200 and ALL-CAN300 program number manually===
===Selecting LV-CAN200 and ALL-CAN300 program number manually===
Steps to set program number:
* Hold SWITCH down till LED stars blinking.
* Release the SWITCH.
* Then LED starts blinking and counting first digit of program number (one blink means digit 1, two blink digit 2 etc).
* To stop counter push SWITCH.
* Release the SWITCH, then LED starts blinking and counting second digit of program number.
* To stop counter push SWITCH.
* Release the SWITCH, then LED starts blinking and counting third digit on program number.
* To stop counter push SWITCH.
* Release SWITCH, if programming is succeded LED will blink 10 times.
==SIMPLE-CAN - contactless CAN-BUS reader==
==SIMPLE-CAN - contactless CAN-BUS reader==
==Connecting FMB120 Can adapters ALL-CAN300 and LV-CAN200==
==Connecting FMB120 Can adapters ALL-CAN300 and LV-CAN200==