Wiki Knowledge Base | Teltonika GPS

Changes

Template:FMB CAN adapters (view source)

Revision as of 16:40, 11 April 2018

282 bytes removed ,  16:40, 11 April 2018
m
→‎FMB120 ALL-CAN300 and LV-CAN200 parameters configuration
Line 109: Line 109:  
Byte6:<br/><span style=color:#66D6AD>0x01</span> – Second front hydraulic turned on<br/><span style=color:#66D6AD>0x02</span> – Third front hydraulic turned on<br/><span style=color:#66D6AD>0x04</span> – Fourth front hydraulic turned on<br/><span style=color:#66D6AD>0x08</span> – Second rear hydraulic turned on<br/><span style=color:#66D6AD>0x10</span> – Third rear hydraulic turned on<br/><span style=color:#66D6AD>0x20</span> – Fourth rear hydraulic turned on<br/><span style=color:#66D6AD>0x40</span> – Front three-point Hitch turned on<br/><span style=color:#66D6AD>0x80</span> – Rear three-point Hitch turned on<br/>
 
Byte6:<br/><span style=color:#66D6AD>0x01</span> – Second front hydraulic turned on<br/><span style=color:#66D6AD>0x02</span> – Third front hydraulic turned on<br/><span style=color:#66D6AD>0x04</span> – Fourth front hydraulic turned on<br/><span style=color:#66D6AD>0x08</span> – Second rear hydraulic turned on<br/><span style=color:#66D6AD>0x10</span> – Third rear hydraulic turned on<br/><span style=color:#66D6AD>0x20</span> – Fourth rear hydraulic turned on<br/><span style=color:#66D6AD>0x40</span> – Front three-point Hitch turned on<br/><span style=color:#66D6AD>0x80</span> – Rear three-point Hitch turned on<br/>
 
Byte7:<br/><span style=color:#00331A>0x01</span> – Left joystick moved right<br/><span style=color:#00331A>0x02</span> – Left joystick moved left<br/><span style=color:#00331A>0x04</span> – Left joystick moved front<br/><span style=color:#00331A>0x08</span> – Left joystick moved back<br/><span style=color:#00331A>0x10</span> – Front Power Take-Off turned on<br/>
 
Byte7:<br/><span style=color:#00331A>0x01</span> – Left joystick moved right<br/><span style=color:#00331A>0x02</span> – Left joystick moved left<br/><span style=color:#00331A>0x04</span> – Left joystick moved front<br/><span style=color:#00331A>0x08</span> – Left joystick moved back<br/><span style=color:#00331A>0x10</span> – Front Power Take-Off turned on<br/>
 +
|-
 
! style="text-align: left; vertical-align: top;" | Security state flags
 
! style="text-align: left; vertical-align: top;" | Security state flags
 
| style="text-align: left; vertical-align: top;" | 8
 
| style="text-align: left; vertical-align: top;" | 8
−
| style="text-align: left; vertical-align: top;" | Byte0 (LSB):<br/><span style=color:#008181>0x20</span> – bit appears when any operate button in car was put<br/><span style=color:#008181>0x40</span> – bit appears when immobiliSer is in service mode<br/><span style=color:#008181>0x80</span> – immobiliser, bit appears during introduction of a programmed sequence of keys in the car<br/>
+
| style="text-align: left; vertical-align: top;" | Byte0 (LSB):<br/><span style=color:#008181>0x20</span> – Bit appears when any operate button in car was put<br/><span style=color:#008181>0x40</span> – Bit appears when immobiliSer is in service mode<br/><span style=color:#008181>0x80</span> – Immobiliser, bit appears during introduction of a programmed sequence of keys in the car<br/>
 +
Byte1:<br/><span style=color:#FF6600>0x01</span> – the key is in ignition lock<br/><span style=color:#FF6600>0x02</span> – Ignition on<br/><span style=color:#FF6600>0x04</span> – Dynamic ignition on<br/><span style=color:#FF6600>0x08</span> – Webasto<br/><span style=color:#FF6600>0x20</span> – Car closed by factory's remote control<br/><span style=color:#FF6600>0x40</span> – Factory-installed alarm system is actuated (is in panic mode)<br/><span style=color:#FF6600>0x80</span> – Factory-installed alarm system is emulated by module<br/>
 +
Byte2:<br/><span style=color:#339A6C>0x01</span> – Parking activated (automatic gearbox)<br/><span style=color:#339A6C>0x10</span> – Handbrake is actuated (information available only with ignition on)<br/><span style=color:#339A6C>0x20</span> – Footbrake is actuated (information available only with ignition on)<br/><span style=color:#339A6C>0x40</span> – Engine is working (information available only when the ignition on)<br/><span style=color:#339A6C>0x80</span> – Reverse is on<br/>  
   −
Byte1:<br/><span style=color:#0000FF>0x01</span> – Excessive play under the threshing drum<br/><span style=color:#0000FF>0x02</span> – Grain tank is open<br/><span style=color:#0000FF>0x04</span> – 100% of Grain tank<br/><span style=color:#0000FF>0x08</span> – 70% of Grain tank<br/><span style=color:#0000FF>0x10</span> – Drain filter in hydraulic system of drive cylinders is plugged<br/><span style=color:#0000FF>0x20</span> – Pressure filter of drive cylinders hydraulic system is plugged<br/><span style=color:#0000FF>0x40</span> – Alarm oil level in oil tank<br/><span style=color:#0000FF>0x80</span> – Pressure filter of brakes hydraulic system is plugged<br/>
  −
Byte2:<br/><span style=color:#339A6C>0x01</span> – Oil filter of engine is plugged<br/><span style=color:#339A6C>0x02</span> – Fuel filter is plugged<br/><span style=color:#339A6C>0x04</span> – Air filter is plugged<br/><span style=color:#339A6C>0x08</span> – Alarm oil temperature in hydraulic system of chassis<br/><span style=color:#339A6C>0x10</span> – Alarm oil temperature in hydraulic system of drive cylinders<br/><span style=color:#339A6C>0x20</span> – Alarm oil pressure in engine<br/><span style=color:#339A6C>0x40</span> – Alarm coolant level<br/><span style=color:#339A6C>0x80</span> – Overflow chamber of hydraulic unit<br/>
   
Byte3:<br/><span style=color:#9A3300>0x01</span> – Unloader drive is ON. Unloading tube pivot is in idle position<br/><span style=color:#9A3300>0x02</span> – No operator!<br/><span style=color:#9A3300>0x04</span> – Straw walker is plugged<br/><span style=color:#9A3300>0x08</span> – Water in fuel<br/><span style=color:#9A3300>0x10</span> – Cleaning fan RPM<br/><span style=color:#9A3300>0x20</span> – Trashing drum RPM<br/>
 
Byte3:<br/><span style=color:#9A3300>0x01</span> – Unloader drive is ON. Unloading tube pivot is in idle position<br/><span style=color:#9A3300>0x02</span> – No operator!<br/><span style=color:#9A3300>0x04</span> – Straw walker is plugged<br/><span style=color:#9A3300>0x08</span> – Water in fuel<br/><span style=color:#9A3300>0x10</span> – Cleaning fan RPM<br/><span style=color:#9A3300>0x20</span> – Trashing drum RPM<br/>
 
Byte4:<br/><span style=color:#FF00FF>0x02</span> – Low water level in the tank<br/><span style=color:#FF00FF>0x04</span> – First rear hydraulic turned on<br/><span style=color:#FF00FF>0x08</span> – Standalone engine working<br/><span style=color:#FF00FF>0x10</span> – Right joystick moved right<br/><span style=color:#FF00FF>0x20</span> – Right joystick moved left<br/><span style=color:#FF00FF>0x40</span> – Right joystick moved front<br/><span style=color:#FF00FF>0x80</span> – Right joystick moved back<br/>
 
Byte4:<br/><span style=color:#FF00FF>0x02</span> – Low water level in the tank<br/><span style=color:#FF00FF>0x04</span> – First rear hydraulic turned on<br/><span style=color:#FF00FF>0x08</span> – Standalone engine working<br/><span style=color:#FF00FF>0x10</span> – Right joystick moved right<br/><span style=color:#FF00FF>0x20</span> – Right joystick moved left<br/><span style=color:#FF00FF>0x40</span> – Right joystick moved front<br/><span style=color:#FF00FF>0x80</span> – Right joystick moved back<br/>
Retrieved from "https://wiki.teltonika-gps.com/view/Special:MobileDiff/7257"