Changes

no edit summary
Line 6: Line 6:  
In this chapter, we will show you how to configure the device and also how to configure the Wialon platform for receiving information from ADAS.
 
In this chapter, we will show you how to configure the device and also how to configure the Wialon platform for receiving information from ADAS.
   −
'''It is important to note that specific ADAS cameras starting with the Serial Number S/N: 9C can only be connected and used with FMX640 devices. Cameras starting with different S/N numbers for example; 9B, is currently not supported.'''
+
== Configurator set-up instructions for Spec ID on FMX640 ==
 +
 
 +
 
 +
'''It is important to note that ONLY specific ADAS cameras starting with the Serial Number S/N: 9C can be connected and used with FMX640 devices. Cameras starting with different S/N numbers for example; 9B, is currently not supported.'''
   −
== Configurator set-up instructions for Spec ID on FMX640 ==
      
Base firmware version of the device will not have the ability to connect ADAS through RS235 connection, it has to be activated using special(spec) firmware. If you want to remove spec ID, you need to install '''FMX64.Ver.01.02.10.Rev.103_ID1''' firmware, after that you can install spec '''ID1039''' firmware.
 
Base firmware version of the device will not have the ability to connect ADAS through RS235 connection, it has to be activated using special(spec) firmware. If you want to remove spec ID, you need to install '''FMX64.Ver.01.02.10.Rev.103_ID1''' firmware, after that you can install spec '''ID1039''' firmware.
0

edits