| Line 4: |
Line 4: |
| | [[image:DualCam1.png|400px]] <br> | | [[image:DualCam1.png|400px]] <br> |
| | | | |
| − | ==How to insert microSD cards==
| |
| − |
| |
| − | Teltonika DualCam can hold 2 x microSD cards, which are inserted on both sides of the camera (front and rear). <br>
| |
| − | When the card is inserted correctly, it locks in with a "click". How the cards are inserted is depicted in the photos.
| |
| − |
| |
| − | '''NOTE:''' If you do not insert microSD cards, you will be only available to receive images, but you do not receive video if the trigger will happen or you will send SMS/GPRS command.
| |
| − |
| |
| − | [[image:Dual_camera_MicroSD_card_insert_1.png|400px]]
| |
| − | [[image:Dual_camera_MicroSD_card_insert_2.png|400px]]
| |
| − |
| |
| − | ==Camera mounting recommendation==
| |
| − |
| |
| − | Camera location:
| |
| − | * To maximize the field of view, the camera should be mounted in the middle of the front windshield so that an even field of view for the sides of the vehicle is recorded. We recommend you mount the Dual Cam near the rearview mirror area.
| |
| − | * We always recommend angling the lens slightly upwards so that video footage displays about 60% road and 40% sky. This angle offers a good balance of exposure and details.
| |
| − | * View footage from SD card while mounting the Dual Cam so you can select what position and angle you prefer the Dual Cam to be set at.
| |
| − |
| |
| − | Rear camera adjusting:
| |
| − |
| |
| − | [[image:Dual camera rotation 1.png|200px]]
| |
| − | [[image:Dual camera rotation 2.png|200px]]
| |
| − | [[image:Dual camera rotation 3.png|200px]]
| |
| − | [[image:Dual camera rotation 4.png|200px]]
| |
| − |
| |
| − | * Gently remove the cover from the case of the top camera. After the cover is removed you will see the screw.
| |
| − | * Unscrew it and rotate the rear camera to adjust the better view of the cabin. The rear camera contains infrareds on it.
| |
| − | * Put the cover back on the camera.
| |
| − |
| |
| − | Connecting power source:
| |
| − | * Due to high camera power consumption we always recommend connecting the camera to the vehicle ignition. The camera start-up in 2-3 seconds when vehicle ignition goes ON.
| |
| − | * Camera ground (Black cable) must be connected to the same (common) Ground wire as FMx125 device.
| |
| − | * Ground wire is connected to the vehicle frame or metal parts that are fixed to the frame.
| |
| − |
| |
| − | Please refer to FMx125 device mounting recommendation: https://wiki.teltonika-gps.com/view/FMC125_First_Start#Mounting_recommendations
| |
| | | | |
| | ==Video file conversion== | | ==Video file conversion== |