Wiki Knowledge Base | Teltonika GPS

Changes

EYE BEACON / BTSID1 (view source)

Revision as of 12:40, 23 September 2022

110 bytes removed ,  12:40, 23 September 2022
→‎Teltonika configurator new functionalities (not released yet)
Line 198: Line 198:  
'''Bluetooth 4.0'''
 
'''Bluetooth 4.0'''
 
<br>
 
<br>
−
Functionalities were reorganized and transferred to Bluetooth 4.0 configuration tab with additional horizontal tabs selection for specific settings:
  −
<br>
  −
* '''Global''' - Parameters responsible for device scanning ability like power and duratations.
  −
* '''Beacon''' - Parameters to enable Beacon scanning scenarios.
   
<br>
 
<br>
 
'''Common settings'''
 
'''Common settings'''
Line 217: Line 213:  
<br>
 
<br>
 
'''Beacons'''
 
'''Beacons'''
 +
<br>
 
<br>
 
<br>
 
Beacons configuration instruction: [https://wiki.teltonika-gps.com/view/How_to_start_with_FMB_devices_and_Beacons%3F How to start with FMB devices and Beacons?]
 
Beacons configuration instruction: [https://wiki.teltonika-gps.com/view/How_to_start_with_FMB_devices_and_Beacons%3F How to start with FMB devices and Beacons?]
Line 244: Line 241:  
*The New firmware has two Beacon lists, so it is possible to create two separate lists of beacons, standard one with Beacons ID (UUID:Major:Minor, or Namespace:InstanceID) and new one according Beacon Name (by name or prefix, for example all beacons with prefix "ID1" can be saved.)  
 
*The New firmware has two Beacon lists, so it is possible to create two separate lists of beacons, standard one with Beacons ID (UUID:Major:Minor, or Namespace:InstanceID) and new one according Beacon Name (by name or prefix, for example all beacons with prefix "ID1" can be saved.)  
 
<br>
 
<br>
−
* '''Beacon ID''' - configurator allows to configure beacon id in iBeacon or Eddystone format.
+
* '''Beacon ID''' - configurator allows to configure beacon ID in iBeacon or Eddystone format in Beacon List.
−
* '''Beacon Name''' - user can enter names of beacons which needs to be filtered. It would filter the full name or only if the prefix of the name is configured like “BTS”.
+
* '''Beacon Name''' - The names of beacons which need to be filtered can be entered. Only the beginning part of the EYE Beacon local name has to match. For example, if in the EYE Beacon name list “EYE_Beacon” is added and the FM tracker detects EYE_Beacon1, EYE_Beacon2, EYE_BeaconXYZ, all these EYE Beacons will be added to EYE Beacon name list.  
−
Both ID and Name filters can work at the same time. If beacon doesn’t match ID filter, but matches the name, it will be added to beacon list. Filtering only works Beacon Mode is set to Simple.
+
Both ID and Name filters can work at the same time. If beacon doesn’t match ID filter, but matches the name, it will be added to beacon list. However, Filtering only works Beacon Mode is set to Simple.
 
<br>
 
<br>
 
<br>  [[File:Eye Beacon Prox.png|right|border]]
 
<br>  [[File:Eye Beacon Prox.png|right|border]]
Retrieved from "https://wiki.teltonika-gps.com/view/Special:MobileDiff/76283"