Changes

'''Eye feature mode: Proximity'''

'''Eye feature mode: Proximity'''

EYE beacon Proximity events is a functionality which periodically creates three different types of records, depending on the captured Beacons' RSSI levels.  This functionality is only supported with Teltonika EYE beacons.<br> Proximity events consist of near, away and lost events: <br>

EYE beacon Proximity events is a functionality which can periodically create up to three different types of records, depending on the captured Beacons' RSSI levels.  This functionality is only supported with Teltonika EYE beacons.<br> Proximity events consist of near, away and lost events: <br>

*When EYE beacon RSSI level is below the first configured threshold, the beacon will be added to Near Beacon Record '''(AVL ID: 10828)'''

*When EYE beacon RSSI level is above the 1st configured threshold, the beacon will be added to Near Record '''(AVL ID: 10828)'''

*When EYE BEACON RSSI level is between the second and first configured threshold, beacon is added to Away Beacon record '''(AVL ID: 10829)'''

*When EYE Beacon RSSI level is between the 1st and 2nd configured threshold, beacon is added to Away record '''(AVL ID: 10829)'''

*When EYE Beacon RSSI level is lower than the second configured threshold, beacon is added to Lost Beacon record '''(AVL ID: 10831)'''. In the case of EYE Beacon disappearing from the environment and not being detected by the FM tracker anymore, the beacon will be added to Lost Beacon record and will be removed from Beacon list.

*When EYE Beacon RSSI level is lower than the 2nd configured threshold, beacon is added to Lost Beacon record '''(AVL ID: 10831)'''. In the case of EYE Beacon disappearing from the environment and not being detected by the FM tracker anymore, the beacon will be added to Lost Beacon record and will be removed from Beacon list.

'''Event modes''' <br>

'''Event modes''' <br>

*Disabled – Record generating is disabled for the selected range

*Disabled – Record generating is disabled for the selected range

*Periodic – Records will be periodically generated for the selected range, according to the configured record period on move or on stop value.

*Periodic – Records will be periodically generated for the selected range, according to the configured '''''record period on move''''' or '''''record period on stop''''' value.

*On Change – Records will be generated as soon as the Eye Beacon number changes for the selected range.

*On Change – Records will be generated as soon as the number of Eye Beacons changes for the appropriate range.

'''Averaging Timeout''' <br>

'''Averaging Timeout''' <br>

Lost and Found Beacon records only include EYE Beacon which was lost or found, not the full Beacon list. <br>

Lost and Found Beacon records only include EYE Beacon which was lost or found, not the full Beacon list. <br>

*If multiple EYE Beacons were found or lost at the same time, multiple will be  included into the record. <br>

*If multiple EYE Beacons were found or lost at the same time, multiple will be  included into the record. <br>

*If Visible Beacon List is enabled, Beacon records containing the list of visible beacons will be generated according to the configured period parameters ''Record Period on Move'' and ''Record Period on Stop''

*If Visible Beacon List is enabled, Beacon records containing the list of visible beacons will be generated according to the configured period parameters '''''Record Period on Move''''' and '''''Record Period on Stop'''''

Advanced Beacon protocol is being used to send Lost & Found records.  <br>

Advanced Beacon protocol is being used to send Lost & Found records.  <br>

Note:Same AVL ID’s as for Proximity events are being used, since two features cannot work at the same time.

Note:Same AVL ID’s as for Proximity events are being used, since two features cannot work at the same time.

|-

|-

| 0||Beacon RSSI Level

| 0||Beacon RSSI Level

|1 byte unsigned integer||Reserved. Added To each Eye Sensor start. Currently always 0.

|1 byte unsigned integer||Received signal strength indication of the EYE Beacon value in dBm. The hex value must be converted to

decimal value from signed 2s complement.

|-

|-

|1||Beacon ID

|1||Beacon ID

|Array||For Eye Beacons that are transmitting using Eddystone protocol Beacon ID is Namespace , InstanceID (16 bytes), For iBeacon protocol it is UUID, Major, Minor (20 bytes)

|Array||For Eye Beacons that are transmitting using Eddystone protocol Beacon ID is Namespace , InstanceID (16 bytes),

For iBeacon protocol it is UUID, Major, Minor (20 bytes)

|-

|-

|13

|13