142
edits
Changes
mLine 142:
Line 142: − + + + + + + + + + + + + + + + + + + + + + +
no edit summary
==Testing NBL-2==
==Testing NBL-2==
Power up the FMB device and start logging it into the Terminal application. When the RFID card is not enabled, the BLE RFID #1 parameter (AVL ID: 451) will show a specific value. Example:
'''1. Using the Configurator'''
Power up the FMB device, connect it to PC and open Configurator application. Configure devices as shown above.
When the RFID card is not enabled, the BLE RFID #1 parameter (AVL ID: 451) will show a specific value.
Example (Status tab => I/O Info):
[[File:NBL-2 cfg1.png|frameless|900x900px]]
When the RFID card is activated (card touched to NBL-2 and followed by two beeps) BLE RFID #1 parameter should look like this:
[[File:NBL-2 cfg2.png|frameless|900x900px]]
'''2. Using the Terminal application'''
Power up the FMB device, connect it to PC and start logging it into the Terminal application.
When the RFID card is not enabled, the BLE RFID #1 parameter (AVL ID: 451) will show a specific value.
Example:
''IO ID[451]: 0x0000000000000000''
''IO ID[451]: 0x0000000000000000''