0
edits
Changes
no edit summary
The camera can also be configured through its configuration, main settings that which can be seen are pointed below:
The camera can also be configured through its configuration, main settings that which can be seen are pointed below:
[[:File:Dms1.03.png|File:Dms1.03.png]]
[[File:Dms1.03.png]]
Configurable parameters:
*ON/OFF: Enable Drowsiness, Distraction, Phone, Smoking, Yawning.
*Sound Type: Check the warning sound and select the one you prefer. Press Play button to test Warning Alarm Sound.
*Vibrator: Enable vitration function. (On / Off)
*Sensitivity: Set the sensitivity on a scale of 1 to 3. As the level gets higher, it gets more sensitive. Yawning warning will generate when yawning for 2 seconds.
*Activation Speed:
# You can set up activation speed by DSM alert respectively.
# Set the Activation Speed ( 15 ~ 60Km/h ≒ 10 ~ 40mph). The functions will be acticvated when the vehicle is faster than this speed.
# If you select Others, you can input the activation speed in the below box. Note that the input range is between 5Km and 100km.
* DIP switch on unit: Enable DIP switch on DSM’s unit.
* Sound Level: Control the warning sound level on a scale of 1 to 4.
* Test Mode : If you want to test DSM at any speed, please select “ON” ⑨ Time-out Feature: Select if apply below time-out logic. (On / Off) * Time-out feature: An event and chime will be fired when ‘First Trigger Count’ number of triggers happen within ‘First Trigger Interval’. After the first event and chine, additional events’chimes up to ‘Max Trigger Count’ will be fired as long as they happen within ‘Max Trigger Interval’. When ‘First Trigger Interval’ or ‘Max Trigger Interval’ expire, the trigger count it reset to 0.
[[Category:DSM]]
[[Category:DSM]]